Desktop

logo CLEAR.png

Tablet & Mobile

01691 770366   |   sales@selectschoolsupplies.co.uk

Drill Bits and Blades

 
 
£
£

Blacksmiths Drill Bit 22mm

High carbon steel twist drill with high speed steel tip and polished, dry rust resistant coating. Large diameter bits with reduced 12.5mm diameter shank enables use with standard chucks. Use on alumin

£8.65

Flat Bit 25mm

Fully hardened high carbon steel bit. Precision ground tri-point bit for a clean cut and reduced splintering. Hex shank for quick change. For drilling softwood, medium hardwood, particle board, plaste

£1.25

Jigsaw Blades for Metal 5pk

Straight clean cut of thin metal sheet with milled wavy teeth 50mm

£3.00

Cobalt Drill Bit Set 19pce

M35 high speed steel with 5% cobalt for strength and wear resistance. 135° split point prevents walkaround. Fully ground with amber finish. Manufactured to DIN338. 1 - 10mm in 0.5 increments

£35.00

Titanium -Coated HSS & Masonry Drill Bit Set 19pce

High speed steel bits. Set has both titanium-coated bits for steel, woods and plastic and tungsten carbide-tipped masonry bits for stone, concrete and block. Includes HSS Titanium 1, 1.5, 2, 2.5, 3, 3

£6.55

Assorted Drill Bit Set 126pce

42 HSS titanium 1-10mm; 10 masonry 3-10mm; 10 wood-boring 3-10mm; 42 x 25mm Cr-V driver bits: (slotted/Phillips/PZD/hex/trx and square); 5 x 200mm wood-boring 5-10mm; 5 x 200mm masonry 5-10mm; 4 hole

£27.75

HSS-R jobber Bits 10pk 3mm

HSS-R roll forged 4341 high speed steel. Manufactured to DIN338 with 118° point. General purpose ‘jobber’ drill bits for drilling steel, aluminium, non-ferrous metals, plastics and wood

£1.70

HSS-R jobber Bits 10pk 4.5mm

HSS-R roll forged 4341 high speed steel. Manufactured to DIN338 with 118° point. General purpose ‘jobber’ drill bits for drilling steel, aluminium, non-ferrous metals, plastics and wood

£2.55

HSS-R jobber Bits 10pk 5mm

HSS-R roll forged 4341 high speed steel. Manufactured to DIN338 with 118° point. General purpose ‘jobber’ drill bits for drilling steel, aluminium, non-ferrous metals, plastics and wood

£2.90

HSS Titanium -Coated Drill Bits 2pk 4mm

Ground twist high speed steel. For aluminium, steel, plastic, wood and non-ferrous metals. Titanium-coated for extended life and fast bit penetration.

£2.00

HSS Titanium -Coated Drill Bits 2pk 6mm

Ground twist high speed steel. For aluminium, steel, plastic, wood and non-ferrous metals. Titanium-coated for extended life and fast bit penetration.

£2.60

Cobalt Drill Bits 2pk 2mm

M35 high speed steel with 5% cobalt for strength and wear resistance. 135° split point prevents walkaround. Fully ground with amber finish. Manufactured to DIN338. Always use cooling agent

£1.75

Cobalt Drill Bits 2pk 3mm

M35 high speed steel with 5% cobalt for strength and wear resistance. 135° split point prevents walkaround. Fully ground with amber finish. Manufactured to DIN338. Always use cooling agent

£1.99

Cobalt Drill Bits 2pk 4mm

M35 high speed steel with 5% cobalt for strength and wear resistance. 135° split point prevents walkaround. Fully ground with amber finish. Manufactured to DIN338. Always use cooling agent

£2.55

Blacksmiths Drill Bit 18mm

High carbon steel twist drill with high speed steel tip and polished, dry rust resistant coating. Large diameter bits with reduced 12.5mm diameter shank enables use with standard chucks. Use on alumin

£6.10

Jigsaw Blades for Wood 5pk

For fast, straight cutting of softwood, timber sheet, plastic pipes and profiles. Bayonet fitting HCS blade with side-set milled teeth. Working length 75mm.

£1.60

Bi-Metal Holesaw Kit 9pce

Variable pitch holesaws in bi-metal construction. Hardened HSS teeth, flexible high carbon steel backing. For cast steel, malleable cast iron, stainless and structural steel, alloyed and non-alloyed a

£23.65

Cobalt Drill Bit Set of 7

M35 high speed steel with 5% cobalt for strength and wear resistance. 135° split point prevents walkaround. Fully ground with amber finish. Manufactured to DIN338. Sizes: 1.5, 2, 3, 4, 5, 5.5 and 6mm.

£7.99

Cobalt Drill Bit Set 25pce

M35 high speed steel with 5% cobalt for strength and wear resistance. 135° split point prevents walkaround. Fully ground with amber finish. Manufactured to DIN338. 1 - 13mm in 0.5 increments

£66.25

Titanium -Coated HSS Drill Bit Set 19pce

Ultra-hard and long-lasting titanium-coated high speed steel. Precision ground. Suitable for most metals, plastic and wood. Sizes: 1-10mm in 0.5mm increments. Supplied in strong metal case

£11.10

Assorted Drill Bit Set 204pce

51 HSS titanium-coated drill bits; 42 black finished HSS drill bits; 14 masonry; 18 wood-boring drill bits; 3 pilot drill bits; 47 screwdriver bits; 10 nut drivers; 3 drill stoppers; 4 holesaws; 1 hol

£39.50

HSS-R jobber Bits 10pk 3.5mm

HSS-R roll forged 4341 high speed steel. Manufactured to DIN338 with 118° point. General purpose ‘jobber’ drill bits for drilling steel, aluminium, non-ferrous metals, plastics and wood

£1.85

HSS-R jobber Bits 10pk 4mm

HSS-R roll forged 4341 high speed steel. Manufactured to DIN338 with 118° point. General purpose ‘jobber’ drill bits for drilling steel, aluminium, non-ferrous metals, plastics and wood

£2.25

HSS-R jobber Bits 10pk 6mm

HSS-R roll forged 4341 high speed steel. Manufactured to DIN338 with 118° point. General purpose ‘jobber’ drill bits for drilling steel, aluminium, non-ferrous metals, plastics and wood

£4.15

HSS-R jobber Bits 10pk 8mm

HSS-R roll forged 4341 high speed steel. Manufactured to DIN338 with 118° point. General purpose ‘jobber’ drill bits for drilling steel, aluminium, non-ferrous metals, plastics and wood

£7.40

HSS Titanium -Coated Drill Bits 2pk 3mm

Ground twist high speed steel. For aluminium, steel, plastic, wood and non-ferrous metals. Titanium-coated for extended life and fast bit penetration.

£1.55

HSS Titanium -Coated Drill Bits 2pk 5mm

Ground twist high speed steel. For aluminium, steel, plastic, wood and non-ferrous metals. Titanium-coated for extended life and fast bit penetration.

£2.25

Cobalt Drill Bits 2pk 3.5mm

M35 high speed steel with 5% cobalt for strength and wear resistance. 135° split point prevents walkaround. Fully ground with amber finish. Manufactured to DIN338. Always use cooling agent

£2.35

Cobalt Drill Bits 2pk 5.5mm

M35 high speed steel with 5% cobalt for strength and wear resistance. 135° split point prevents walkaround. Fully ground with amber finish. Manufactured to DIN338. Always use cooling agent

£3.40

Titanium -Coated Forstner Bit Set 7pce

M35 high speed steel with 5% cobalt for strength and wear resistance. 135° split point prevents walkaround. Fully ground with amber finish. Manufactured to DIN338. 1 - 13mm in 0.5 increments.

£12.20

Blacksmiths Drill Bit 16mm

High carbon steel twist drill with high speed steel tip and polished, dry rust resistant coating. Large diameter bits with reduced 12.5mm diameter shank enables use with standard chucks. Use on alumin

£4.99

Blacksmiths Drill Bit 25mm

High carbon steel twist drill with high speed steel tip and polished, dry rust resistant coating. Large diameter bits with reduced 12.5mm diameter shank enables use with standard chucks. Use on alumin

£12.00

Flat Bit 32mm

Fully hardened high carbon steel bit. Precision ground tri-point bit for a clean cut and reduced splintering. Hex shank for quick change. For drilling softwood, medium hardwood, particle board, plaste

£2.15

Lip & Spur Drill Bits pk10 8mm

Precision ground, high carbon steel drill bits with single centre point and twin outer cutting spurs. Centring point enables drill bit to be positioned exactly on a pre-marked spot before drilling com

£5.25

Jigsaw Blades for Metal 5pk

Straight clean cut of thin metal sheet with milled wavy teeth 50mm

£2.99

Titanium -Coated HSS Drill Bit Set 17pce

Titanium-coated high speed steel. For steel, alloys, natural and artificial wood and plastic. Supplied in convenient storage case. Includes 2 x 1mm and 1 x 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5,

£7.85

Titanium -Coated HSS Drill Bit/Screwdriver Set 29pce

Chrome vanadium high-speed steel bits for use with metal, plastic and wood. Includes 13 x HSS titanium-coated drill bits: (1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5 and 7mm); 3 x 50mm Phillips dr

£7.75

HSS-R Jobber Drill Bit Set 13pce

HSS-R roll forged 4341 high speed steel ‘jobber’ bits. Manufactured to DIN338 with 118° point. For drilling steel, aluminium, non-ferrous metals, plastics and wood. Use cooling agent and drill at slow

£4.80

HSS-R Jobber Drill Bit Set 19pce

HSS-R roll forged 4341 high speed steel ‘jobber’ bits. Manufactured to DIN338 with 118° point. For drilling steel, aluminium, non-ferrous metals, plastics and wood. Use cooling agent and drill at slow

£9.15

HSS-R Jobber Drill Bit Set 25pce

HSS-R roll forged 4341 high speed steel ‘jobber’ bits. Manufactured to DIN338 with 118° point. For drilling steel, aluminium, non-ferrous metals, plastics and wood. Use cooling agent and drill at slow

£19.65

HSS-R Jobber Drill Bit Set 170pce

HSS-R roll forged 4241 high speed steel ‘jobber’ bits manufactured to DIN338 with 118° point. Contents includes metric: 15 x 1 & 1.5mm, 10 x 2, 2.5, 3, 3.2, 3.5, 4, 4.5, 5 and 6mm; 5 x 6.5, 7, 7.5, 8,

£47.95

HSS-R jobber Bits 10pk 2mm

HSS-R roll forged 4341 high speed steel. Manufactured to DIN338 with 118° point. General purpose ‘jobber’ drill bits for drilling steel, aluminium, non-ferrous metals, plastics and wood

£1.50

HSS-R jobber Bits 10pk 2.5mm

HSS-R roll forged 4341 high speed steel. Manufactured to DIN338 with 118° point. General purpose ‘jobber’ drill bits for drilling steel, aluminium, non-ferrous metals, plastics and wood

£1.60

HSS-R jobber Bits 10pk 5.5mm

HSS-R roll forged 4341 high speed steel. Manufactured to DIN338 with 118° point. General purpose ‘jobber’ drill bits for drilling steel, aluminium, non-ferrous metals, plastics and wood

£3.45

HSS-R jobber Bits 10pk 7mm

HSS-R roll forged 4341 high speed steel. Manufactured to DIN338 with 118° point. General purpose ‘jobber’ drill bits for drilling steel, aluminium, non-ferrous metals, plastics and wood

£5.75

Cobalt Drill Bits 2pk 5mm

M35 high speed steel with 5% cobalt for strength and wear resistance. 135° split point prevents walkaround. Fully ground with amber finish. Manufactured to DIN338. Always use cooling agent

£2.99

Cobalt Drill Bits 2pk 6mm

M35 high speed steel with 5% cobalt for strength and wear resistance. 135° split point prevents walkaround. Fully ground with amber finish. Manufactured to DIN338. Always use cooling agent

£3.99

Blacksmiths Drill Bit 14mm

High carbon steel twist drill with high speed steel tip and polished, dry rust resistant coating. Large diameter bits with reduced 12.5mm diameter shank enables use with standard chucks. Use on alumin

£4.10

Showing products per page

Blacksmiths Drill Bit 22mm

High carbon steel twist drill with high speed steel tip and polished, dry rust resistant coating. Large diameter bits with reduced 12.5mm diameter shank enables use with standard chucks. Use on alumin

£8.65

Flat Bit 25mm

Fully hardened high carbon steel bit. Precision ground tri-point bit for a clean cut and reduced splintering. Hex shank for quick change. For drilling softwood, medium hardwood, particle board, plaste

£1.25

Jigsaw Blades for Metal 5pk

Straight clean cut of thin metal sheet with milled wavy teeth 50mm

£3.00

Cobalt Drill Bit Set 19pce

M35 high speed steel with 5% cobalt for strength and wear resistance. 135° split point prevents walkaround. Fully ground with amber finish. Manufactured to DIN338. 1 - 10mm in 0.5 increments

£35.00

Titanium -Coated HSS & Masonry Drill Bit Set 19pce

High speed steel bits. Set has both titanium-coated bits for steel, woods and plastic and tungsten carbide-tipped masonry bits for stone, concrete and block. Includes HSS Titanium 1, 1.5, 2, 2.5, 3, 3

£6.55

Assorted Drill Bit Set 126pce

42 HSS titanium 1-10mm; 10 masonry 3-10mm; 10 wood-boring 3-10mm; 42 x 25mm Cr-V driver bits: (slotted/Phillips/PZD/hex/trx and square); 5 x 200mm wood-boring 5-10mm; 5 x 200mm masonry 5-10mm; 4 hole

£27.75

HSS-R jobber Bits 10pk 3mm

HSS-R roll forged 4341 high speed steel. Manufactured to DIN338 with 118° point. General purpose ‘jobber’ drill bits for drilling steel, aluminium, non-ferrous metals, plastics and wood

£1.70

HSS-R jobber Bits 10pk 4.5mm

HSS-R roll forged 4341 high speed steel. Manufactured to DIN338 with 118° point. General purpose ‘jobber’ drill bits for drilling steel, aluminium, non-ferrous metals, plastics and wood

£2.55

HSS-R jobber Bits 10pk 5mm

HSS-R roll forged 4341 high speed steel. Manufactured to DIN338 with 118° point. General purpose ‘jobber’ drill bits for drilling steel, aluminium, non-ferrous metals, plastics and wood

£2.90

HSS Titanium -Coated Drill Bits 2pk 4mm

Ground twist high speed steel. For aluminium, steel, plastic, wood and non-ferrous metals. Titanium-coated for extended life and fast bit penetration.

£2.00

HSS Titanium -Coated Drill Bits 2pk 6mm

Ground twist high speed steel. For aluminium, steel, plastic, wood and non-ferrous metals. Titanium-coated for extended life and fast bit penetration.

£2.60

Cobalt Drill Bits 2pk 2mm

M35 high speed steel with 5% cobalt for strength and wear resistance. 135° split point prevents walkaround. Fully ground with amber finish. Manufactured to DIN338. Always use cooling agent

£1.75

Cobalt Drill Bits 2pk 3mm

M35 high speed steel with 5% cobalt for strength and wear resistance. 135° split point prevents walkaround. Fully ground with amber finish. Manufactured to DIN338. Always use cooling agent

£1.99

Cobalt Drill Bits 2pk 4mm

M35 high speed steel with 5% cobalt for strength and wear resistance. 135° split point prevents walkaround. Fully ground with amber finish. Manufactured to DIN338. Always use cooling agent

£2.55

Blacksmiths Drill Bit 18mm

High carbon steel twist drill with high speed steel tip and polished, dry rust resistant coating. Large diameter bits with reduced 12.5mm diameter shank enables use with standard chucks. Use on alumin

£6.10

Jigsaw Blades for Wood 5pk

For fast, straight cutting of softwood, timber sheet, plastic pipes and profiles. Bayonet fitting HCS blade with side-set milled teeth. Working length 75mm.

£1.60

Bi-Metal Holesaw Kit 9pce

Variable pitch holesaws in bi-metal construction. Hardened HSS teeth, flexible high carbon steel backing. For cast steel, malleable cast iron, stainless and structural steel, alloyed and non-alloyed a

£23.65

Cobalt Drill Bit Set of 7

M35 high speed steel with 5% cobalt for strength and wear resistance. 135° split point prevents walkaround. Fully ground with amber finish. Manufactured to DIN338. Sizes: 1.5, 2, 3, 4, 5, 5.5 and 6mm.

£7.99

Cobalt Drill Bit Set 25pce

M35 high speed steel with 5% cobalt for strength and wear resistance. 135° split point prevents walkaround. Fully ground with amber finish. Manufactured to DIN338. 1 - 13mm in 0.5 increments

£66.25

Titanium -Coated HSS Drill Bit Set 19pce

Ultra-hard and long-lasting titanium-coated high speed steel. Precision ground. Suitable for most metals, plastic and wood. Sizes: 1-10mm in 0.5mm increments. Supplied in strong metal case

£11.10

Assorted Drill Bit Set 204pce

51 HSS titanium-coated drill bits; 42 black finished HSS drill bits; 14 masonry; 18 wood-boring drill bits; 3 pilot drill bits; 47 screwdriver bits; 10 nut drivers; 3 drill stoppers; 4 holesaws; 1 hol

£39.50

HSS-R jobber Bits 10pk 3.5mm

HSS-R roll forged 4341 high speed steel. Manufactured to DIN338 with 118° point. General purpose ‘jobber’ drill bits for drilling steel, aluminium, non-ferrous metals, plastics and wood

£1.85

HSS-R jobber Bits 10pk 4mm

HSS-R roll forged 4341 high speed steel. Manufactured to DIN338 with 118° point. General purpose ‘jobber’ drill bits for drilling steel, aluminium, non-ferrous metals, plastics and wood

£2.25

HSS-R jobber Bits 10pk 6mm

HSS-R roll forged 4341 high speed steel. Manufactured to DIN338 with 118° point. General purpose ‘jobber’ drill bits for drilling steel, aluminium, non-ferrous metals, plastics and wood

£4.15

HSS-R jobber Bits 10pk 8mm

HSS-R roll forged 4341 high speed steel. Manufactured to DIN338 with 118° point. General purpose ‘jobber’ drill bits for drilling steel, aluminium, non-ferrous metals, plastics and wood

£7.40

HSS Titanium -Coated Drill Bits 2pk 3mm

Ground twist high speed steel. For aluminium, steel, plastic, wood and non-ferrous metals. Titanium-coated for extended life and fast bit penetration.

£1.55

HSS Titanium -Coated Drill Bits 2pk 5mm

Ground twist high speed steel. For aluminium, steel, plastic, wood and non-ferrous metals. Titanium-coated for extended life and fast bit penetration.

£2.25

Cobalt Drill Bits 2pk 3.5mm

M35 high speed steel with 5% cobalt for strength and wear resistance. 135° split point prevents walkaround. Fully ground with amber finish. Manufactured to DIN338. Always use cooling agent

£2.35

Cobalt Drill Bits 2pk 5.5mm

M35 high speed steel with 5% cobalt for strength and wear resistance. 135° split point prevents walkaround. Fully ground with amber finish. Manufactured to DIN338. Always use cooling agent

£3.40

Titanium -Coated Forstner Bit Set 7pce

M35 high speed steel with 5% cobalt for strength and wear resistance. 135° split point prevents walkaround. Fully ground with amber finish. Manufactured to DIN338. 1 - 13mm in 0.5 increments.

£12.20

Blacksmiths Drill Bit 16mm

High carbon steel twist drill with high speed steel tip and polished, dry rust resistant coating. Large diameter bits with reduced 12.5mm diameter shank enables use with standard chucks. Use on alumin

£4.99

Blacksmiths Drill Bit 25mm

High carbon steel twist drill with high speed steel tip and polished, dry rust resistant coating. Large diameter bits with reduced 12.5mm diameter shank enables use with standard chucks. Use on alumin

£12.00

Flat Bit 32mm

Fully hardened high carbon steel bit. Precision ground tri-point bit for a clean cut and reduced splintering. Hex shank for quick change. For drilling softwood, medium hardwood, particle board, plaste

£2.15

Lip & Spur Drill Bits pk10 8mm

Precision ground, high carbon steel drill bits with single centre point and twin outer cutting spurs. Centring point enables drill bit to be positioned exactly on a pre-marked spot before drilling com

£5.25

Jigsaw Blades for Metal 5pk

Straight clean cut of thin metal sheet with milled wavy teeth 50mm

£2.99

Titanium -Coated HSS Drill Bit Set 17pce

Titanium-coated high speed steel. For steel, alloys, natural and artificial wood and plastic. Supplied in convenient storage case. Includes 2 x 1mm and 1 x 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5,

£7.85

Titanium -Coated HSS Drill Bit/Screwdriver Set 29pce

Chrome vanadium high-speed steel bits for use with metal, plastic and wood. Includes 13 x HSS titanium-coated drill bits: (1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5 and 7mm); 3 x 50mm Phillips dr

£7.75

HSS-R Jobber Drill Bit Set 13pce

HSS-R roll forged 4341 high speed steel ‘jobber’ bits. Manufactured to DIN338 with 118° point. For drilling steel, aluminium, non-ferrous metals, plastics and wood. Use cooling agent and drill at slow

£4.80

HSS-R Jobber Drill Bit Set 19pce

HSS-R roll forged 4341 high speed steel ‘jobber’ bits. Manufactured to DIN338 with 118° point. For drilling steel, aluminium, non-ferrous metals, plastics and wood. Use cooling agent and drill at slow

£9.15

HSS-R Jobber Drill Bit Set 25pce

HSS-R roll forged 4341 high speed steel ‘jobber’ bits. Manufactured to DIN338 with 118° point. For drilling steel, aluminium, non-ferrous metals, plastics and wood. Use cooling agent and drill at slow

£19.65

HSS-R Jobber Drill Bit Set 170pce

HSS-R roll forged 4241 high speed steel ‘jobber’ bits manufactured to DIN338 with 118° point. Contents includes metric: 15 x 1 & 1.5mm, 10 x 2, 2.5, 3, 3.2, 3.5, 4, 4.5, 5 and 6mm; 5 x 6.5, 7, 7.5, 8,

£47.95

HSS-R jobber Bits 10pk 2mm

HSS-R roll forged 4341 high speed steel. Manufactured to DIN338 with 118° point. General purpose ‘jobber’ drill bits for drilling steel, aluminium, non-ferrous metals, plastics and wood

£1.50

HSS-R jobber Bits 10pk 2.5mm

HSS-R roll forged 4341 high speed steel. Manufactured to DIN338 with 118° point. General purpose ‘jobber’ drill bits for drilling steel, aluminium, non-ferrous metals, plastics and wood

£1.60

HSS-R jobber Bits 10pk 5.5mm

HSS-R roll forged 4341 high speed steel. Manufactured to DIN338 with 118° point. General purpose ‘jobber’ drill bits for drilling steel, aluminium, non-ferrous metals, plastics and wood

£3.45

HSS-R jobber Bits 10pk 7mm

HSS-R roll forged 4341 high speed steel. Manufactured to DIN338 with 118° point. General purpose ‘jobber’ drill bits for drilling steel, aluminium, non-ferrous metals, plastics and wood

£5.75

Cobalt Drill Bits 2pk 5mm

M35 high speed steel with 5% cobalt for strength and wear resistance. 135° split point prevents walkaround. Fully ground with amber finish. Manufactured to DIN338. Always use cooling agent

£2.99

Cobalt Drill Bits 2pk 6mm

M35 high speed steel with 5% cobalt for strength and wear resistance. 135° split point prevents walkaround. Fully ground with amber finish. Manufactured to DIN338. Always use cooling agent

£3.99

Blacksmiths Drill Bit 14mm

High carbon steel twist drill with high speed steel tip and polished, dry rust resistant coating. Large diameter bits with reduced 12.5mm diameter shank enables use with standard chucks. Use on alumin

£4.10

Showing products per page