Desktop
Tablet & Mobile
01691 770366 | sales@selectschoolsupplies.co.uk
- MENU
-
Chemistry
-
Desktop
Tablet & Mobile
01691 770366 | sales@selectschoolsupplies.co.uk
Versatile lamp head tilt and swivel Adjustable reach swing-arm Inline on/off switch Weighted base with desk tidy Bulb: E14 35w max. halogen candle or 9w energy saver (bulbs not included) Max. height:
Versatile Flexible Neck Integral On/ Off Switch Bulb: E14 35w Halogen Candle or 9w Energy Saver Bulb (Not Included) Height Approx 34cm
Experience consistent results with the DP-303W Advanced Precision Balance from DuraLab. Engineered to deliver reliable performance in any laboratory setting, this precision balance is an economical ye
Experience consistent results with the DP-1002 Advanced Precision Balance from DuraLab. Engineered to deliver reliable performance in any laboratory setting, this precision balance is an economical ye
Voltage 2, 4, 6, 9, 12 or 14VAC or full-wave rectified DC at 4A continuously, or up to 5A for periods of 1 hour (IPC-0256-P). Voltage ranges are selected and locked by means of a removable key. In any
A set of four Mystrica 2.0 wireless colorimeters fitted in a deep Gratnells tray with a lid and polyethylene foam insert Apart from the colorimeters the contents are : • a box of 40 4ml cuvettes • a b
Crystal growing kit to make a set of glow in the dark crystals. Just follow the simple instructions on the container to set up the project in minutes. The crystals will begin to form very quickly, and
Students often think that the brightness of a lamp is only dependent on the current flowing through it. The unit allows the teacher to safely switch a 12V lamp in series with a mains lamp and study th
A multipurpose unit that allows the user to easily calculate Planck's constant, to measure the wavelength of coloured light, demonstrate colour light transmission through colour filters and show the d
Solid steel Small Bayonet Cap (SBC) lamp holder with a tough powder coat paint finish and a solid brass lamp holder with 2 x 4mm electrical sockets. A perfect addition to any school physics laboratory
The Irwin compact loudspeaker unit is fitted with a 10 watt, 8Ω driver. Connection is via colour coded 4mm sockets. Fitted into a durable ABS case.
If you damage the case on one of our Irwin Power Supplies or you wish to give it an overhaul this can be easily achieved with our simple to install replacement cover kits available in a choice of 2 co
Our Powerbase HT unit supplies a constantly variable 0-300V D.C at 60mA and a separate constantly, variable 0-30V D.C. also at 60mA. In addition, it has a heater supply of 6.3V a.c at 2A to power up T
The Powerbase S5 is a great value power supply that provides a range of AC and DC voltages at 5A. Smoothing is achieved by a 4700uF capacitor. The supply has safe lockable DC and AC outputs ensuring t
The Powerbase S8 offers 0 to 12V at 8 amps via our safe relay switching system that provides voltages in 1V steps. AC and DC voltages are available simultaneously in any combination up to a combined o
The Powerbase V8 comes with a high power rotary transformer and a high specification toroid transformer replaces the original chassis transformer. The unit supplies 0-20V smoothed dc and 0-16V AC at 8
With numerous features and functions, Luna precision balances are suitable for most lab weighing tasks. Luna’s display features a stylish look, with easy-to-read 24mm digits in white on a black backgr
Suitable for use in a range of different environments, they are a single use and disposable option for situations where storage is limited. Each cup has been made from a premium food-grade, poly-coate
Input supply voltage 230V DC. Supplyfrequency 50Hz. Output voltage 2, 4, 6, 8, 10, 12V ACnominal 1, 3, 5, 7, 9, 11V full waverectified DC nominal. Mains fuse rear panel 2A, 20mm quickblow mains plug 3
The Irwin low voltage versatile heat pad that allows the user to heat up beakers, conical flasks etc. The unit heats up to about 75 degrees Celsius which is great for heating water, boiling alcohol et
Digital thermometer with stainless steel sensor probe Simple LCD Display for easy reading Measures in Fahrenheit or Celsius Feature Saving power: auto-off after 15 minutes of no-operation Low battery
To observe magnetic fields generated by a constant electrical current. A Circular Coil Mounted on a Plastic base. Iron filings can be scattered on the clear plastic sheet and when a current then flows
Metal-bodied solder sucker for removal of excess solder. Overall length 185mm..
For use with the motor to demonstrate the \nproduction of electrical energy directly from \nlight energy. The apparatus comprises a \nselenium photo-voltic cell.
For use with the mounted solar cell or on its own. A12V, 24W S.B.C. bulb in a metal socket mounted on a base with pair of 4 mm sockets
This is a small low \nconsumption electric \nmotor on a base \nspecially designed to run \ndirectly from the output of \nthe solar cell.
A red spirit filled thermometer yellow backed -10 to 110. 150mm long.
A red spirit filled thermometer yellow backed -10 to 110. 150mm long.
Carbon fibre composite digital vernier caliper. Resolution 0 - 150 x 0.1mm / 0 - 6 x 0.01”. 2-way measurement, internal and external.
IME type, improved heavy duty design, has plated steel body with depth gauge. Dual scale graduated 0-15cm √ó 0.1mm and 0-6 √ó 1/128 inches. Provided with thumb-press for easy movement and
An N Size, UM5, PCB Mount Battery Holder by Comfortable, moulded in Black Thermoplastic
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
Showing products per page
Versatile lamp head tilt and swivel Adjustable reach swing-arm Inline on/off switch Weighted base with desk tidy Bulb: E14 35w max. halogen candle or 9w energy saver (bulbs not included) Max. height:
Versatile Flexible Neck Integral On/ Off Switch Bulb: E14 35w Halogen Candle or 9w Energy Saver Bulb (Not Included) Height Approx 34cm
Experience consistent results with the DP-303W Advanced Precision Balance from DuraLab. Engineered to deliver reliable performance in any laboratory setting, this precision balance is an economical ye
Experience consistent results with the DP-1002 Advanced Precision Balance from DuraLab. Engineered to deliver reliable performance in any laboratory setting, this precision balance is an economical ye
Voltage 2, 4, 6, 9, 12 or 14VAC or full-wave rectified DC at 4A continuously, or up to 5A for periods of 1 hour (IPC-0256-P). Voltage ranges are selected and locked by means of a removable key. In any
A set of four Mystrica 2.0 wireless colorimeters fitted in a deep Gratnells tray with a lid and polyethylene foam insert Apart from the colorimeters the contents are : • a box of 40 4ml cuvettes • a b
Crystal growing kit to make a set of glow in the dark crystals. Just follow the simple instructions on the container to set up the project in minutes. The crystals will begin to form very quickly, and
Students often think that the brightness of a lamp is only dependent on the current flowing through it. The unit allows the teacher to safely switch a 12V lamp in series with a mains lamp and study th
A multipurpose unit that allows the user to easily calculate Planck's constant, to measure the wavelength of coloured light, demonstrate colour light transmission through colour filters and show the d
Solid steel Small Bayonet Cap (SBC) lamp holder with a tough powder coat paint finish and a solid brass lamp holder with 2 x 4mm electrical sockets. A perfect addition to any school physics laboratory
The Irwin compact loudspeaker unit is fitted with a 10 watt, 8Ω driver. Connection is via colour coded 4mm sockets. Fitted into a durable ABS case.
If you damage the case on one of our Irwin Power Supplies or you wish to give it an overhaul this can be easily achieved with our simple to install replacement cover kits available in a choice of 2 co
Our Powerbase HT unit supplies a constantly variable 0-300V D.C at 60mA and a separate constantly, variable 0-30V D.C. also at 60mA. In addition, it has a heater supply of 6.3V a.c at 2A to power up T
The Powerbase S5 is a great value power supply that provides a range of AC and DC voltages at 5A. Smoothing is achieved by a 4700uF capacitor. The supply has safe lockable DC and AC outputs ensuring t
The Powerbase S8 offers 0 to 12V at 8 amps via our safe relay switching system that provides voltages in 1V steps. AC and DC voltages are available simultaneously in any combination up to a combined o
The Powerbase V8 comes with a high power rotary transformer and a high specification toroid transformer replaces the original chassis transformer. The unit supplies 0-20V smoothed dc and 0-16V AC at 8
With numerous features and functions, Luna precision balances are suitable for most lab weighing tasks. Luna’s display features a stylish look, with easy-to-read 24mm digits in white on a black backgr
Suitable for use in a range of different environments, they are a single use and disposable option for situations where storage is limited. Each cup has been made from a premium food-grade, poly-coate
Input supply voltage 230V DC. Supplyfrequency 50Hz. Output voltage 2, 4, 6, 8, 10, 12V ACnominal 1, 3, 5, 7, 9, 11V full waverectified DC nominal. Mains fuse rear panel 2A, 20mm quickblow mains plug 3
The Irwin low voltage versatile heat pad that allows the user to heat up beakers, conical flasks etc. The unit heats up to about 75 degrees Celsius which is great for heating water, boiling alcohol et
Digital thermometer with stainless steel sensor probe Simple LCD Display for easy reading Measures in Fahrenheit or Celsius Feature Saving power: auto-off after 15 minutes of no-operation Low battery
To observe magnetic fields generated by a constant electrical current. A Circular Coil Mounted on a Plastic base. Iron filings can be scattered on the clear plastic sheet and when a current then flows
Metal-bodied solder sucker for removal of excess solder. Overall length 185mm..
For use with the motor to demonstrate the \nproduction of electrical energy directly from \nlight energy. The apparatus comprises a \nselenium photo-voltic cell.
For use with the mounted solar cell or on its own. A12V, 24W S.B.C. bulb in a metal socket mounted on a base with pair of 4 mm sockets
This is a small low \nconsumption electric \nmotor on a base \nspecially designed to run \ndirectly from the output of \nthe solar cell.
A red spirit filled thermometer yellow backed -10 to 110. 150mm long.
A red spirit filled thermometer yellow backed -10 to 110. 150mm long.
Carbon fibre composite digital vernier caliper. Resolution 0 - 150 x 0.1mm / 0 - 6 x 0.01”. 2-way measurement, internal and external.
IME type, improved heavy duty design, has plated steel body with depth gauge. Dual scale graduated 0-15cm √ó 0.1mm and 0-6 √ó 1/128 inches. Provided with thumb-press for easy movement and
An N Size, UM5, PCB Mount Battery Holder by Comfortable, moulded in Black Thermoplastic
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
Showing products per page