Desktop
Tablet & Mobile
01691 770366 | sales@selectschoolsupplies.co.uk
Electrical insulation tape in a range of fade-resistant colours. Rubber glue on PVC carrier with good elasticity and elongation properties allowing conformity to irregular surfaces. Provides moisture-
Electrical insulation tape in a range of fade-resistant colours. Rubber glue on PVC carrier with good elasticity and elongation properties allowing conformity to irregular surfaces. Provides moisture-
(Portable Appliance Tester and Checker). Performs electrical safety tests on portable appliances allowing compliance with EAWA regulations. The unit performs earth bond and insulation tests on both Cl
Enables students to investigate nature and properties of electricity by using simple circuits which are easily constructed on a base board. The connector system uses P.C.B. strips with cut-out sections whose ends can easily be inserted in spring t
A range of units where a highly stable resistance coil is placed inside a plastic box. Connection are made via 4 mm terminals. Accuracy ± 1%.
A range of units where a highly stable resistance coil is placed inside a plastic box. Connection are made via 4 mm terminals. Accuracy ± 1%.
A range of units where a highly stable resistance coil is placed inside a plastic box. Connection are made via 4 mm terminals. Accuracy ± 1%.
A range of units where a highly stable resistance coil is placed inside a plastic box. Connection are made via 4 mm terminals. Accuracy ± 1%.
A range of units where a highly stable resistance coil is placed inside a plastic box. Connection are made via 4 mm terminals. Accuracy ± 1%.
Each plate is fitted with a 4 mm socket terminal
Each plate is fitted with a 4 mm socket terminal
Each wound on a rectangular insulated bobbin, connections by 4mm sockets spaced at 19mm.
The component holder, with \n4 mm socket connectors, is \nan instrument for holding the \nelectronic components such \nas resistors, capacitors, LEDs, \nLDRs etc for the use in \ndifferent experimental \ncircuits.
Terminals on these lamp boards let you connect lamps in series or parallel. Lamp board features removable shunt wires that allow for quick changing from parallel to series or any combinations of the t
Ultra Max Long life rechargeable batteries. Recharge up to 1000 times, compatible with any brand of charger. Come ready charged Size AAA Pk4
Ultra Max Long life rechargeable batteries. Recharge up to 1000 times, compatible with any brand of charger. Come ready charged Size AAA Pk4
Ultra Max Long life rechargeable batteries. Recharge up to 1000 times, compatible with any brand of charger. Come ready charged Size AAA Pk4
With transparent glass body. Quick blow type. 20 mm long and dia. 5 mm.
4mm pin, 18mm long spring insert for making firm contact with the socket into which inserted and solder nipple for attaching wire lead, fixed to a screw on hard plastic body. Overall length of plug about 40mm.
A robust 100R Variable Resistor module for use with the BrightSparks 4kids range of modules. Module designed for 1.5 - 6VDC circuits Connections made by two unpolarised 4mm plug in sockets includes Non slip rubber feet
A robust bulb module for use with the BrightSparks 4kids range of modules. Operating Voltage 1.5 - 6VDC Maximum Bulb rating 12Volts 200mA Connections made by two unpolarised 4mm plug in sockets includes Non slip rubber
A robust L.E.D module for use with the BrightSparks 4kids range of modules. Operating Voltage 2.5 - 6VDC Fitted with internal current limiting resistor. Connections made by two polarised 4mm plug in sockets includes Non
A robust L.E.D module for use with the BrightSparks 4kids range of modules. Operating Voltage 2.5 - 6VDC Fitted with internal current limiting resistor. Connections made by two polarised 4mm plug in sockets
A robust Magnetic Switch module for use with the BrightSparks 4kids range of modules Large glass body with easy to see contacts Module designed for 1.5 - 6VDC circuits Connections made by two unpolarised 4mm plug in sockets
A 1 farad capacitor that can be used for energy storage. Securely fixed and mounted on o sealed ABS enclosure with non slip rubber feet. Connections made by two polarised 4mm plug in sockets includes Non slip rubber feet
1.5 to 3V budget priced DC motor with 2mm output shaft. Specification Length: 25mm.
Enables students to investigate nature and properties of electricity by using simple circuits which are easily constructed on a base board. The connector system uses P.C.B. strips with cut-out sections whose ends can easily be inserted in spring t
The dynamo model is mounted on a base with a driving wheel. Output is through 4 mm sockets and a low voltage bulb is also provided as a simple output indicator.
Investigate the working principle of circuit breaker type fuse, with this demonstration model. The apparatus is built on a robust plastic base and includes resistive loads to simulate external wiring
To distinguish between the conductors and insulators. Kit contains five strips of different material (wood, acrylic, copper brass and aluminium), one lamp and one 9 V battery mounted on plastic base.
A simple kit for students to gain insight into field poles, armatures and switches, Kit includes one mounting base, field pole, armature, two wire brushes, a piece of copper wire, two shaft supports,
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
Showing products per page
Electrical insulation tape in a range of fade-resistant colours. Rubber glue on PVC carrier with good elasticity and elongation properties allowing conformity to irregular surfaces. Provides moisture-
Electrical insulation tape in a range of fade-resistant colours. Rubber glue on PVC carrier with good elasticity and elongation properties allowing conformity to irregular surfaces. Provides moisture-
(Portable Appliance Tester and Checker). Performs electrical safety tests on portable appliances allowing compliance with EAWA regulations. The unit performs earth bond and insulation tests on both Cl
Enables students to investigate nature and properties of electricity by using simple circuits which are easily constructed on a base board. The connector system uses P.C.B. strips with cut-out sections whose ends can easily be inserted in spring t
A range of units where a highly stable resistance coil is placed inside a plastic box. Connection are made via 4 mm terminals. Accuracy ± 1%.
A range of units where a highly stable resistance coil is placed inside a plastic box. Connection are made via 4 mm terminals. Accuracy ± 1%.
A range of units where a highly stable resistance coil is placed inside a plastic box. Connection are made via 4 mm terminals. Accuracy ± 1%.
A range of units where a highly stable resistance coil is placed inside a plastic box. Connection are made via 4 mm terminals. Accuracy ± 1%.
A range of units where a highly stable resistance coil is placed inside a plastic box. Connection are made via 4 mm terminals. Accuracy ± 1%.
Each plate is fitted with a 4 mm socket terminal
Each plate is fitted with a 4 mm socket terminal
Each wound on a rectangular insulated bobbin, connections by 4mm sockets spaced at 19mm.
The component holder, with \n4 mm socket connectors, is \nan instrument for holding the \nelectronic components such \nas resistors, capacitors, LEDs, \nLDRs etc for the use in \ndifferent experimental \ncircuits.
Terminals on these lamp boards let you connect lamps in series or parallel. Lamp board features removable shunt wires that allow for quick changing from parallel to series or any combinations of the t
Ultra Max Long life rechargeable batteries. Recharge up to 1000 times, compatible with any brand of charger. Come ready charged Size AAA Pk4
Ultra Max Long life rechargeable batteries. Recharge up to 1000 times, compatible with any brand of charger. Come ready charged Size AAA Pk4
Ultra Max Long life rechargeable batteries. Recharge up to 1000 times, compatible with any brand of charger. Come ready charged Size AAA Pk4
With transparent glass body. Quick blow type. 20 mm long and dia. 5 mm.
4mm pin, 18mm long spring insert for making firm contact with the socket into which inserted and solder nipple for attaching wire lead, fixed to a screw on hard plastic body. Overall length of plug about 40mm.
A robust 100R Variable Resistor module for use with the BrightSparks 4kids range of modules. Module designed for 1.5 - 6VDC circuits Connections made by two unpolarised 4mm plug in sockets includes Non slip rubber feet
A robust bulb module for use with the BrightSparks 4kids range of modules. Operating Voltage 1.5 - 6VDC Maximum Bulb rating 12Volts 200mA Connections made by two unpolarised 4mm plug in sockets includes Non slip rubber
A robust L.E.D module for use with the BrightSparks 4kids range of modules. Operating Voltage 2.5 - 6VDC Fitted with internal current limiting resistor. Connections made by two polarised 4mm plug in sockets includes Non
A robust L.E.D module for use with the BrightSparks 4kids range of modules. Operating Voltage 2.5 - 6VDC Fitted with internal current limiting resistor. Connections made by two polarised 4mm plug in sockets
A robust Magnetic Switch module for use with the BrightSparks 4kids range of modules Large glass body with easy to see contacts Module designed for 1.5 - 6VDC circuits Connections made by two unpolarised 4mm plug in sockets
A 1 farad capacitor that can be used for energy storage. Securely fixed and mounted on o sealed ABS enclosure with non slip rubber feet. Connections made by two polarised 4mm plug in sockets includes Non slip rubber feet
1.5 to 3V budget priced DC motor with 2mm output shaft. Specification Length: 25mm.
Enables students to investigate nature and properties of electricity by using simple circuits which are easily constructed on a base board. The connector system uses P.C.B. strips with cut-out sections whose ends can easily be inserted in spring t
The dynamo model is mounted on a base with a driving wheel. Output is through 4 mm sockets and a low voltage bulb is also provided as a simple output indicator.
Investigate the working principle of circuit breaker type fuse, with this demonstration model. The apparatus is built on a robust plastic base and includes resistive loads to simulate external wiring
To distinguish between the conductors and insulators. Kit contains five strips of different material (wood, acrylic, copper brass and aluminium), one lamp and one 9 V battery mounted on plastic base.
A simple kit for students to gain insight into field poles, armatures and switches, Kit includes one mounting base, field pole, armature, two wire brushes, a piece of copper wire, two shaft supports,
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
British manufactured PVC Insulated Equipment Wire, 85°, to Defence Standard (Def. Stan.) 61-12 Pt 6. Size: 1/0.6 mm Rating: 1.8 A @ 1,000V RMS max O/D: 1.2 mm nominal Wall cover: PVC 0.3 mm to DEF61-1
Showing products per page