Desktop
Tablet & Mobile
01691 770366 | sales@selectschoolsupplies.co.uk
ZPH-202 pH Bench meter - A proffesional quality bench meter Large 18mm LCD Display Calibration certificate Power: 1x 9V Alkaline battery not inc
The ADM-930 digital multimeter is suitable for use by electricians, electronic engineers, general industry & laboratories. It is EN61010-1 CAT III 600V, CATII 1000V rated. A large high contrast LCD, a single positive action ro
Non-RoHS Photoconductive cadmium sulphide cell with a spectral response similar to the human eye. As light falling on the cell increases, so the resistance of the cell decreases. Peak spectral response: Typ. 550 nm
A range of encapsulated solar cell modules mounted in sturdy black polycarbonate cases. The faceplate consists of tiny bubble magnifiers which maximise performance by enhancing light as it strikes the cell. Monocrystalline constructi
The SEP Wind Turbine is ready-assembled and can be used to carry out a wide range of experiments on wind power. The blades of the turbine can be easily attached, removed or adjusted, allowing students to investigate the effects of changing the num
Building on the success of the SEP Energymeter, this new USB version boasts datalogging and an improved specification: Current range: ±7A (current can flow in either direction) Voltage range: ±25V
For ordinary magnets, iron bars, strips etc. Consists of a 250 mm long solenoid wound with insulated copper wire and mounted on a base, with switch and 4mm terminals. Operating voltage is 12 V A.C. or D.C. At 6A max.
1.5 to 3V budget priced DC motor with 2mm output shaft. Specification Length: 25mm.
Specifications: Resistance:200 ohm, 2000 ohm, 20k ohm, 200k ohm, & 2000k ohm D.C.Voltage: 200 mV, 2000 mV, 20V, 200V & 1000 V A.C.Voltage: 200 & 750 V D.C.Current: 2000 uA, 20 mA, 200 mA, 10 A
This rugged 3 digit Multimeter has a dual slope A-D converter uses C-MOS technology for auto-zeroing, polarity selection and over-range indication. It is ideal for use by electricians, electronic engineers, general industry & laboratories
A nickel-chromium iron alloy especially suitable for high temperature applications such as elements, rheostats etc. Nichrome Wire, bare, 0.28, 32swg 125gm
A nickel-chromium iron alloy especially suitable for high temperature applications such as elements, rheostats etc. Nichrome Wire, bare, 0.31, 30swg 125gm
A nickel-chromium iron alloy especially suitable for high temperature applications such as elements, rheostats etc. Nichrome Wire, bare, 0.40, 28swg 125gm
A nickel-chromium iron alloy especially suitable for high temperature applications such as elements, rheostats etc. Nichrome Wire, bare, 0.56, 24swg 125gm
A copper nickel alloy of low temperature co-efficient suitable for resistance coils etc. Eureka/Constantan Wire, Bare, 0.28, 32swg 125gm
A copper nickel alloy of low temperature co-efficient suitable for resistance coils etc. Eureka/Constantan Wire, Bare, 0.31, 30swg 125gm
A copper nickel alloy of low temperature co-efficient suitable for resistance coils etc. Eureka/Constantan Wire, Bare, 0.55, 24swg 125gm
A copper nickel alloy of low temperature co-efficient suitable for resistance coils etc. Eureka/Constantan Wire, Bare, 0.70, 22swg 125gm
This kettle features a good size capacity has and energy saving technology. - 2.2 kW. - 1.7 litre capacity. - Boil dry protection automatically switches off when the kettle is empty. -
Showing products per page
ZPH-202 pH Bench meter - A proffesional quality bench meter Large 18mm LCD Display Calibration certificate Power: 1x 9V Alkaline battery not inc
The ADM-930 digital multimeter is suitable for use by electricians, electronic engineers, general industry & laboratories. It is EN61010-1 CAT III 600V, CATII 1000V rated. A large high contrast LCD, a single positive action ro
Non-RoHS Photoconductive cadmium sulphide cell with a spectral response similar to the human eye. As light falling on the cell increases, so the resistance of the cell decreases. Peak spectral response: Typ. 550 nm
A range of encapsulated solar cell modules mounted in sturdy black polycarbonate cases. The faceplate consists of tiny bubble magnifiers which maximise performance by enhancing light as it strikes the cell. Monocrystalline constructi
The SEP Wind Turbine is ready-assembled and can be used to carry out a wide range of experiments on wind power. The blades of the turbine can be easily attached, removed or adjusted, allowing students to investigate the effects of changing the num
Building on the success of the SEP Energymeter, this new USB version boasts datalogging and an improved specification: Current range: ±7A (current can flow in either direction) Voltage range: ±25V
For ordinary magnets, iron bars, strips etc. Consists of a 250 mm long solenoid wound with insulated copper wire and mounted on a base, with switch and 4mm terminals. Operating voltage is 12 V A.C. or D.C. At 6A max.
1.5 to 3V budget priced DC motor with 2mm output shaft. Specification Length: 25mm.
Specifications: Resistance:200 ohm, 2000 ohm, 20k ohm, 200k ohm, & 2000k ohm D.C.Voltage: 200 mV, 2000 mV, 20V, 200V & 1000 V A.C.Voltage: 200 & 750 V D.C.Current: 2000 uA, 20 mA, 200 mA, 10 A
This rugged 3 digit Multimeter has a dual slope A-D converter uses C-MOS technology for auto-zeroing, polarity selection and over-range indication. It is ideal for use by electricians, electronic engineers, general industry & laboratories
A nickel-chromium iron alloy especially suitable for high temperature applications such as elements, rheostats etc. Nichrome Wire, bare, 0.28, 32swg 125gm
A nickel-chromium iron alloy especially suitable for high temperature applications such as elements, rheostats etc. Nichrome Wire, bare, 0.31, 30swg 125gm
A nickel-chromium iron alloy especially suitable for high temperature applications such as elements, rheostats etc. Nichrome Wire, bare, 0.40, 28swg 125gm
A nickel-chromium iron alloy especially suitable for high temperature applications such as elements, rheostats etc. Nichrome Wire, bare, 0.56, 24swg 125gm
A copper nickel alloy of low temperature co-efficient suitable for resistance coils etc. Eureka/Constantan Wire, Bare, 0.28, 32swg 125gm
A copper nickel alloy of low temperature co-efficient suitable for resistance coils etc. Eureka/Constantan Wire, Bare, 0.31, 30swg 125gm
A copper nickel alloy of low temperature co-efficient suitable for resistance coils etc. Eureka/Constantan Wire, Bare, 0.55, 24swg 125gm
A copper nickel alloy of low temperature co-efficient suitable for resistance coils etc. Eureka/Constantan Wire, Bare, 0.70, 22swg 125gm
This kettle features a good size capacity has and energy saving technology. - 2.2 kW. - 1.7 litre capacity. - Boil dry protection automatically switches off when the kettle is empty. -
Showing products per page