Desktop
Tablet & Mobile
01691 770366 | sales@selectschoolsupplies.co.uk
- MENU
-
Chemistry
-
Desktop
Tablet & Mobile
01691 770366 | sales@selectschoolsupplies.co.uk
A pack of 10 pre-cut cardboard balloon buggy chassis and wheels, dowel axels, balloons and nozzles. Simply pop-out the pieces of card and assembled (no glue or tape required). This is a versatile low-
This remarkable alloy melts at just 61°C, but does not contain lead or cadmium. It is relatively hard and extremely tough. It is used, for example, to fill small tubes for bending without crushing, ca
Silly putty’ or ‘bouncy putty’ has long been available as an amusement but this type of material – properly known as visco-elastic polymer or dilatant compound – has serious engineering applications.
To demonstrate the Lenz’s law and effects of electromagnetically induced currents. A ring launcher consist of the base unit and built-in vertical solenoid of thick copper wire with a removeable iron c
Durable apparatus to study velocity, acceleration, and projectile motion. Marbles can be launched from five different speeds at any angle between 0 and 90°. Velocity of the marble can range from 3 m/s
Understanding the principles of physics that occur on a roller coaster has become easier. This triple play apparatus consists of three tracks – one straight down, one with one loop, and the third with
This track is modelled after the famous Brachistochrone problem. Using this track, you can test whether the path of the shortest length is the path of the quickest descent.
Operates on 12V A.C. The timer has an electromagnet, with spring loaded guides, the table is struck by a dotting screw carried on the armature. The peg on the support table is movable to allow maximum use of carbon paper discs
A lightweight hand operated vacuum pump, drawing 15cm3 per stroke, \nup to a maximum vacuum of 50mmHg. It can be used to produce positive gauge pressures up to 2atm.
(Falling Body Apparatus) Showing that horizontal and vertical motions are independent of each other. Consists of a wooden block 190 x 58 x 30 mm approx. with a pivoted L-section spring loaded metal launching bar with a trigger catch. On releasing
With a diameter of 15cm and a coiled height of 15.5cm, this rainbow coloured springy behaves like any other, just on a much larger scale.
Steel fly wheel 100 mm diameter, mass 1.5 Kg with pulley 20 mm diameter on shaft held in brackets. Mounted on base.
For demonstrating the transmissibility \nof fluid pressure and to show how \nmechanical advantage may be \nobtained using interconnected \ncylinders of different diameters. \nBased upon graduated glass \nsyringes having capacities of 10 ml \nand 5
Apparatus may be used to explore the laws of motion without an air table and to study the inertia, constant velocity and acceleration, and collisions in two dimensions. On flat smooth surface, the balloon puck can glide through without much resist
To Study the effects of friction using 4 different surface materials on a board Includes surface board, hooks and wooden blocks, With instruction manual.
Limbs 280 x 5 mm bore with ends riffled & bent at 90° for rear connections, mounted on graduated plastics base.
Magnetic wheel toy that spins around the specially design metal track at the flick of a wrist. Its clever design makes the most of kinetic and potential energy, meaning only slight movements are necessary to keep it moving. An LED in
For measuring velocity and acceleration. A vibrating striker prints dots on \nthe tape using carbon disc. The unit is housed in a sturdy plastic case, \nworks on 6-9 V DC, producing 25 or 40 dots per second.
Polyox (polyethylene oxide) is a non-toxic, long-chain polymer with a high molar mass. Because of extensive hydrogen bonding, it is soluble in water. A solution of Polyox (approximately 1% w/v) behave
This is claimed to be 'the original' in the sense that it is made in America, by the successors to the firm who first marketed it in 1917. It is entirely metal and smartly packaged with string and sta
This model shows the internal structure of an air cooled two-stroke engine. Ignition is shown via a small bulb. . Mounted on a base.
This track is modelled after the famous Brachistochrone problem. Using this track, you can test whether the path of the shortest length is the path of the quickest descent.
This track is modelled after the famous Brachistochrone problem. Using this track, you can test whether the path of the shortest length is the path of the quickest descent.
This track is modelled after the famous Brachistochrone problem. Using this track, you can test whether the path of the shortest length is the path of the quickest descent.
The heavy duty rotating platform illustrates the concept of rotational inertia. The platform can easily withstand weight of 80 kg. Solid, heavy metal legs and grooved platform ensures maximum stabilit
Top plate measures 11 inches in diameter and can be used with bell jars up to 9 inch diameter. Constructed of cast iron, the plate is equipped with a 3/8 inch hose connection, vacuum release valve, and rubber gasket to provide
A specially designed stand to hold ticker tape rolls, makes an excellent accessory for ticker tape timer (103170)
With 3 M.E.S. Lamp sockets connected in \nparallel, on base with terminals, with three \nlamps of 3.5 V, 0.25 A. Part of the Malvern \nEnergy Transfer Kit
Demonstrate that the forward motion of a ball ejected vertically is the same as that of the vehicle from which it was ejected. A car with ball bearing wheels and vertically mounted spring loaded barrel. The barrel permits two spring tensions. Comp
The set includes a basic jack stand with plunger and a main cylinder, four smaller cylinders, a set of connecting hoses and valves. Smaller cylinders can be easily connected to a basic jack stand with a large main cylinder. Students can lift a hea
With 2 – 6 V DC motor with a 15 mm diameter pulley, mounted on base with terminals.
A glass tube 600 x 38 mm fitted with two rubber bungs, one of which is bored & fitted with an 8 mm diameter tube for connection to a vacuum pump.
For showing conversion of potential energy stored in twisted rubber to kinetic/electrical energy. Elastic bands are looped & stretched between pulley and support. A crank handle and pulley combined with ratchet stop allows the rubber to be wou
This simple unit can help the student understand the operating principle of pump and turbine. The unit consists of a rotor attached to a pulley via a shaft. It also includes 3 metal nozzles and a stopcock. When driven by a motor, the unit works as
Converts muscular energy to other forms of energy. 75 mm diameter hand cranked pulley with rubber belt to drive a small pulley of 20 mm diameter to which a drive output pulley is directly attached. Pulley shafts are mounted in bearings on aluminiu
Large version of the classic desktop kinetic toy. Pull back one of the metal spheres and then release to make it connect with the others, sending the impact energy through the chain and making the sphere on the other end react with e
The loosely coiled, entirely metal, spring can be used in scientific experiments and demonstrations. Traditional design 7cm diam.
Showing products per page
A pack of 10 pre-cut cardboard balloon buggy chassis and wheels, dowel axels, balloons and nozzles. Simply pop-out the pieces of card and assembled (no glue or tape required). This is a versatile low-
This remarkable alloy melts at just 61°C, but does not contain lead or cadmium. It is relatively hard and extremely tough. It is used, for example, to fill small tubes for bending without crushing, ca
Silly putty’ or ‘bouncy putty’ has long been available as an amusement but this type of material – properly known as visco-elastic polymer or dilatant compound – has serious engineering applications.
To demonstrate the Lenz’s law and effects of electromagnetically induced currents. A ring launcher consist of the base unit and built-in vertical solenoid of thick copper wire with a removeable iron c
Durable apparatus to study velocity, acceleration, and projectile motion. Marbles can be launched from five different speeds at any angle between 0 and 90°. Velocity of the marble can range from 3 m/s
Understanding the principles of physics that occur on a roller coaster has become easier. This triple play apparatus consists of three tracks – one straight down, one with one loop, and the third with
This track is modelled after the famous Brachistochrone problem. Using this track, you can test whether the path of the shortest length is the path of the quickest descent.
Operates on 12V A.C. The timer has an electromagnet, with spring loaded guides, the table is struck by a dotting screw carried on the armature. The peg on the support table is movable to allow maximum use of carbon paper discs
A lightweight hand operated vacuum pump, drawing 15cm3 per stroke, \nup to a maximum vacuum of 50mmHg. It can be used to produce positive gauge pressures up to 2atm.
(Falling Body Apparatus) Showing that horizontal and vertical motions are independent of each other. Consists of a wooden block 190 x 58 x 30 mm approx. with a pivoted L-section spring loaded metal launching bar with a trigger catch. On releasing
With a diameter of 15cm and a coiled height of 15.5cm, this rainbow coloured springy behaves like any other, just on a much larger scale.
Steel fly wheel 100 mm diameter, mass 1.5 Kg with pulley 20 mm diameter on shaft held in brackets. Mounted on base.
For demonstrating the transmissibility \nof fluid pressure and to show how \nmechanical advantage may be \nobtained using interconnected \ncylinders of different diameters. \nBased upon graduated glass \nsyringes having capacities of 10 ml \nand 5
Apparatus may be used to explore the laws of motion without an air table and to study the inertia, constant velocity and acceleration, and collisions in two dimensions. On flat smooth surface, the balloon puck can glide through without much resist
To Study the effects of friction using 4 different surface materials on a board Includes surface board, hooks and wooden blocks, With instruction manual.
Limbs 280 x 5 mm bore with ends riffled & bent at 90° for rear connections, mounted on graduated plastics base.
Magnetic wheel toy that spins around the specially design metal track at the flick of a wrist. Its clever design makes the most of kinetic and potential energy, meaning only slight movements are necessary to keep it moving. An LED in
For measuring velocity and acceleration. A vibrating striker prints dots on \nthe tape using carbon disc. The unit is housed in a sturdy plastic case, \nworks on 6-9 V DC, producing 25 or 40 dots per second.
Polyox (polyethylene oxide) is a non-toxic, long-chain polymer with a high molar mass. Because of extensive hydrogen bonding, it is soluble in water. A solution of Polyox (approximately 1% w/v) behave
This is claimed to be 'the original' in the sense that it is made in America, by the successors to the firm who first marketed it in 1917. It is entirely metal and smartly packaged with string and sta
This model shows the internal structure of an air cooled two-stroke engine. Ignition is shown via a small bulb. . Mounted on a base.
This track is modelled after the famous Brachistochrone problem. Using this track, you can test whether the path of the shortest length is the path of the quickest descent.
This track is modelled after the famous Brachistochrone problem. Using this track, you can test whether the path of the shortest length is the path of the quickest descent.
This track is modelled after the famous Brachistochrone problem. Using this track, you can test whether the path of the shortest length is the path of the quickest descent.
The heavy duty rotating platform illustrates the concept of rotational inertia. The platform can easily withstand weight of 80 kg. Solid, heavy metal legs and grooved platform ensures maximum stabilit
Top plate measures 11 inches in diameter and can be used with bell jars up to 9 inch diameter. Constructed of cast iron, the plate is equipped with a 3/8 inch hose connection, vacuum release valve, and rubber gasket to provide
A specially designed stand to hold ticker tape rolls, makes an excellent accessory for ticker tape timer (103170)
With 3 M.E.S. Lamp sockets connected in \nparallel, on base with terminals, with three \nlamps of 3.5 V, 0.25 A. Part of the Malvern \nEnergy Transfer Kit
Demonstrate that the forward motion of a ball ejected vertically is the same as that of the vehicle from which it was ejected. A car with ball bearing wheels and vertically mounted spring loaded barrel. The barrel permits two spring tensions. Comp
The set includes a basic jack stand with plunger and a main cylinder, four smaller cylinders, a set of connecting hoses and valves. Smaller cylinders can be easily connected to a basic jack stand with a large main cylinder. Students can lift a hea
With 2 – 6 V DC motor with a 15 mm diameter pulley, mounted on base with terminals.
A glass tube 600 x 38 mm fitted with two rubber bungs, one of which is bored & fitted with an 8 mm diameter tube for connection to a vacuum pump.
For showing conversion of potential energy stored in twisted rubber to kinetic/electrical energy. Elastic bands are looped & stretched between pulley and support. A crank handle and pulley combined with ratchet stop allows the rubber to be wou
This simple unit can help the student understand the operating principle of pump and turbine. The unit consists of a rotor attached to a pulley via a shaft. It also includes 3 metal nozzles and a stopcock. When driven by a motor, the unit works as
Converts muscular energy to other forms of energy. 75 mm diameter hand cranked pulley with rubber belt to drive a small pulley of 20 mm diameter to which a drive output pulley is directly attached. Pulley shafts are mounted in bearings on aluminiu
Large version of the classic desktop kinetic toy. Pull back one of the metal spheres and then release to make it connect with the others, sending the impact energy through the chain and making the sphere on the other end react with e
The loosely coiled, entirely metal, spring can be used in scientific experiments and demonstrations. Traditional design 7cm diam.
Showing products per page