Desktop
Tablet & Mobile
01691 770366 | sales@selectschoolsupplies.co.uk
Die-cast in alloy, with other parts plated, clamp accepts articles from 290mm dia. actuated by nickel-plated pummels and twin screw. The design of the jaws ensures a firm grip at all angles of opening. Fitted with 15cm aluminium rod.
Complete with rod, sheet iron base, \nstoved enameled with hole, iron rod \n12.5mm dia. nickel-plated. One end \non the rod is rounded the other end is \nmachine threaded. Finished in blue and \nfitted with rubber feet. Base 20 x 12.5cm Rod length
Complete with rod, sheet iron base, \nstoved enameled with hole, iron rod \n12.5mm dia. nickel-plated. One end \non the rod is rounded the other end is \nmachine threaded. Finished in blue and \nfitted with rubber feet. Base 25 x 16cm Rod length 7
Aluminum alloy with plastic clamping screws, holds rods up to 16mm in diameter. With offset jaws for greater strength.
For laboratory stand, die casted alloy, accepts rods up to 16mm dia. Which are secured with nickel-plated Tommy screws.
Complete with rod, sheet iron base, stoved enamelled with hole, iron rod 12.5mm dia, nickle plated. One end of the rod is rounded the other end is machine threaded. Base size 20 x 12.5cm. Rod length 60cm
Top triangular, all steel welded, and legs are bent outwards for stability. Length of one side is 12.5cm and height is 20cm.
To Observe the effects of electric currents on liquids. Eudiometer tube having capacity of 50 ml and graduation of 0.2 ml is made of strudy Borosilicate glass with a large center reservoir bulb. The unit comes with a stand and a pair each of carbo
Complete with rod, sheet iron base, \nstoved enameled with hole, iron rod \n12.5mm dia. nickel-plated. One end \non the rod is rounded the other end is \nmachine threaded. Finished in blue and \nfitted with rubber feet. Base 16 x 10cm Rod length 5
Top triangular, all steel welded, and legs are bent outwards for stability. Length of one side is 12.5cm and height is 20cm.
For laboratory stand, die casted alloy, accepts rods up to 16mm dia. Which are secured with nickel-plated Tommy screws.
Three prong, die-cast in alloy, with other parts plated brass, clamp accepts articles up to 75mm dia. actuated by nickel-plated pummels and twin screw. Jaws are covered in rubber. Fitted with 15cm long aluminium rod
Aluminum alloy with plastic clamping screws, holds rods up to 5/8″ in diameter. With offset jaws for greater strength.
Platinum wire fused into glass rod, protected in a glass tube
Die-cast in alloy, with other parts plated, clamp accepts articles from 290mm dia. actuated by nickel-plated pummels and twin screw. The design of the jaws ensures a firm grip at all angles of opening. Fitted with 15cm aluminium rod.
Calcium silicate, asbestos-free bench mats with well-finished edges. 230 x 230 x 6mm
Calcium silicate, asbestos-free bench mats with well-finished edges. 230 x 230 x 6mm
Clamp for Syringe is designed to hold a 100ml Gas Syringe‚ firmly to reduce the chance of breakage and to make the use of the syringe far more convenient.
Complete with rod, sheet iron base, stoved enamelled with hole, iron rod 12.5mm dia, nickle plated. One end of the rod is rounded the other end is machine threaded. Base size 20 x 12.5cm. Rod length 60cm
Die-cast in alloy, with other parts plated, clamp accepts articles from 290mm dia. actuated by nickel-plated pummels and twin screw. The design of the jaws ensures a firm grip at all angles of opening. Fitted with 15cm alumini
Made of aluminum casting, 3 prong clamp with interlocking jaws allow you to hold objects up to 75mm diameter. It can be used for both burettes and condensers. The jaws are lined with rubber to insure a secure grip. Rod
Inverted “U” tube with its ends closed by sintered discs. Dia of arms 13 mm, overall width 80 mm., overall height 100 mm
Three prong, die-cast in alloy, with other parts plated brass, clamp accepts articles up to 75mm dia. actuated by nickel-plated pummels and twin screw. Jaws are covered in rubber. Fitted with 15cm long aluminium rod
Made from G.I wire, with ceramic centre, extra strong quality in 15cm squares. Copy of UKAS accredited laboratory test certificate available on our website. ASBESTOS TEST CERTIFICATE
This three tier polypropylene pipette rack are non corrosive and can hold up to 50 pipettes. End plates have handgrips for easy handling.
Clamp for Syringe is designed to hold a 100ml Gas Syringe‚ firmly to reduce the chance of breakage and to make the use of the syringe far more convenient.
Showing products per page
Die-cast in alloy, with other parts plated, clamp accepts articles from 290mm dia. actuated by nickel-plated pummels and twin screw. The design of the jaws ensures a firm grip at all angles of opening. Fitted with 15cm aluminium rod.
Complete with rod, sheet iron base, \nstoved enameled with hole, iron rod \n12.5mm dia. nickel-plated. One end \non the rod is rounded the other end is \nmachine threaded. Finished in blue and \nfitted with rubber feet. Base 20 x 12.5cm Rod length
Complete with rod, sheet iron base, \nstoved enameled with hole, iron rod \n12.5mm dia. nickel-plated. One end \non the rod is rounded the other end is \nmachine threaded. Finished in blue and \nfitted with rubber feet. Base 25 x 16cm Rod length 7
Aluminum alloy with plastic clamping screws, holds rods up to 16mm in diameter. With offset jaws for greater strength.
For laboratory stand, die casted alloy, accepts rods up to 16mm dia. Which are secured with nickel-plated Tommy screws.
Complete with rod, sheet iron base, stoved enamelled with hole, iron rod 12.5mm dia, nickle plated. One end of the rod is rounded the other end is machine threaded. Base size 20 x 12.5cm. Rod length 60cm
Top triangular, all steel welded, and legs are bent outwards for stability. Length of one side is 12.5cm and height is 20cm.
To Observe the effects of electric currents on liquids. Eudiometer tube having capacity of 50 ml and graduation of 0.2 ml is made of strudy Borosilicate glass with a large center reservoir bulb. The unit comes with a stand and a pair each of carbo
Complete with rod, sheet iron base, \nstoved enameled with hole, iron rod \n12.5mm dia. nickel-plated. One end \non the rod is rounded the other end is \nmachine threaded. Finished in blue and \nfitted with rubber feet. Base 16 x 10cm Rod length 5
Top triangular, all steel welded, and legs are bent outwards for stability. Length of one side is 12.5cm and height is 20cm.
For laboratory stand, die casted alloy, accepts rods up to 16mm dia. Which are secured with nickel-plated Tommy screws.
Three prong, die-cast in alloy, with other parts plated brass, clamp accepts articles up to 75mm dia. actuated by nickel-plated pummels and twin screw. Jaws are covered in rubber. Fitted with 15cm long aluminium rod
Aluminum alloy with plastic clamping screws, holds rods up to 5/8″ in diameter. With offset jaws for greater strength.
Platinum wire fused into glass rod, protected in a glass tube
Die-cast in alloy, with other parts plated, clamp accepts articles from 290mm dia. actuated by nickel-plated pummels and twin screw. The design of the jaws ensures a firm grip at all angles of opening. Fitted with 15cm aluminium rod.
Calcium silicate, asbestos-free bench mats with well-finished edges. 230 x 230 x 6mm
Calcium silicate, asbestos-free bench mats with well-finished edges. 230 x 230 x 6mm
Clamp for Syringe is designed to hold a 100ml Gas Syringe‚ firmly to reduce the chance of breakage and to make the use of the syringe far more convenient.
Complete with rod, sheet iron base, stoved enamelled with hole, iron rod 12.5mm dia, nickle plated. One end of the rod is rounded the other end is machine threaded. Base size 20 x 12.5cm. Rod length 60cm
Die-cast in alloy, with other parts plated, clamp accepts articles from 290mm dia. actuated by nickel-plated pummels and twin screw. The design of the jaws ensures a firm grip at all angles of opening. Fitted with 15cm alumini
Made of aluminum casting, 3 prong clamp with interlocking jaws allow you to hold objects up to 75mm diameter. It can be used for both burettes and condensers. The jaws are lined with rubber to insure a secure grip. Rod
Inverted “U” tube with its ends closed by sintered discs. Dia of arms 13 mm, overall width 80 mm., overall height 100 mm
Three prong, die-cast in alloy, with other parts plated brass, clamp accepts articles up to 75mm dia. actuated by nickel-plated pummels and twin screw. Jaws are covered in rubber. Fitted with 15cm long aluminium rod
Made from G.I wire, with ceramic centre, extra strong quality in 15cm squares. Copy of UKAS accredited laboratory test certificate available on our website. ASBESTOS TEST CERTIFICATE
This three tier polypropylene pipette rack are non corrosive and can hold up to 50 pipettes. End plates have handgrips for easy handling.
Clamp for Syringe is designed to hold a 100ml Gas Syringe‚ firmly to reduce the chance of breakage and to make the use of the syringe far more convenient.
Showing products per page