Desktop
Tablet & Mobile
01691 770366 | sales@selectschoolsupplies.co.uk
- MENU
-
Chemistry
-
Desktop
Tablet & Mobile
01691 770366 | sales@selectschoolsupplies.co.uk
Regulated DC Power Supply 3V-12V/3A (6 Outputs) DC power supply unit provides regulated DC output voltage with excellent load and line regulation. Description • Compact and Light Weight Design • Fire
SATZ ZPS15 School Power Station Output Voltage selectable: 3V, 4.5V, 6V, 7.5V. 9V, 12V DC Output Current: ZSP15 1.5A - ZSP30 3A Output : Smoothed and regulated Ripple & Noise: less th
The ring launcher consists of a vertically mounted solenoid of thick copper wire with an iron core. The coil is energized with by pressing the push button on the panel. Two aluminium rings are supplied with the apparatus. These rings
A compact kit to illustrate the way electricity is transported around the country. Compri ses two boxes (step up substation and step down substation) and a set of ‚Äö√Ñ√∂‚àö√&e
A floating, high voltage power source useful for supplying charge for quantitative electrostatic experiments, gas discharge tubes needing a filament supply and spectrum tubes. Continuously variable output up to 5kV. 6V/1A AC or 12V/0.5A AC filamen
Sufficient for approximately 500 sample spots) A mixture of cyan, magenta, blue inks which appear black when mixed and separates out into bright constituent colours when subject to card chromatography or electrophoresis.
For use with the motor to demonstrate the \nproduction of electrical energy directly from \nlight energy. The apparatus comprises a \nselenium photo-voltic cell.
A 250W tungsten filament bulb available with screw fitting, internally silvered.
A solar kit incorporating 3 independent modules within a sealed miniature solar panel, enabling a range \nof experiments using voltages between 1.5V and 4.5V and outputs from 100mA up to 300mA. \nComplete with stand, low-inertia DC motor, motor st
A range of encapsulated solar cell modules mounted in sturdy black polycarbonate cases. The faceplate consists of tiny bubble magnifiers which maximise performance by enhancing light as it strikes the cell. Monocrystalline constructi
A range of encapsulated solar cell modules mounted in sturdy black polycarbonate cases. The faceplate consists of tiny bubble magnifiers which maximise performance by enhancing light as it strikes the cell. Monocrystalline constructi
To produce mechanical vibrations when used with a signal generator. The unit is \nmounted on a strong base and is enclosed in a plastic case. A threaded extension \nof the armature allows attachment of the item to be vibrated, e.g., plates for chl
Regulated DC Power Supply 3V-12V/3A (6 Outputs) DC power supply unit provides regulated DC output voltage with excellent load and line regulation Description • Compact and Light Weight Design • Fire r
The (AFR-EJ1 is a 1Kg compact stainless steel weighing scale with a 0.1g weighing resolution. It has a rugged stainless steel construction throughout, it is a hard wearing scale that can stand up to t
The Bench Top Battery eliminator is designed to give the most popular battery voltages. Substitutes a wide variety of batteries including AA, AAA, C, D, and 9 V types. The voltage is conveniently sele
S.B.C. double contact brass, lamp holder mounted on rectangular moulded base, with two 4mm socket connections.
The Bench Top Battery eliminator is designed to give the most popular battery voltages. Substitutes a wide variety of batteries including AA, AAA, C, D, and 9 V types. The voltage is conveniently sele
The Supertex power supply is the first of a new range of products exclusive \ndesigned and developed to meet the needs of schools. \nOffering 1-12V output of both AC and full wave rectified DC the power supply is ideal \nfor general laboratory use
The Bench Top battery powered digital meters measures DC voltages / current. The special IC circuit provides features like auto zero and auto polarity detection. 0-19.99 Amp . Power: 1 x 9v PP3 battery supplied
The Supertek power supply is the first of a new range of products exclusive \ndesigned and developed to meet the needs of schools. \nOffering 1-12V output of both AC and full wave rectified DC the power supply is ideal \nfor general laboratory use
Ideal for classroom demonstration, this hydroelectric power station model allows students to directly observe the process of conversion of water flow to electrical energy that occurs in hydroelectric power plants. The water turbine is mounted on a
For use with the mounted solar cell or on its own. A12V, 24W S.B.C. bulb in a metal socket mounted on a base with pair of 4 mm sockets
Resistance varies with the intensity of light falling on the unit.
Rheostat of excellent quality. They are wound with heavily oxidized resistance wire upon a vitreous \nenameled steel tube. The winding is locked into place with ceramic cement. The tube is carried upon \nrobust enameled die-cast end stands. 4mm so
The ADM-931 digital multimeter is suitable for use by electricians, electronic engineers, general industry & laboratories. It is EN61010-1 CAT III 600V, CATII 1000V rated. A large high contrast LCD, a single positive action ro
PE-03 PH Electrode - Laboratory and Field Use Suitable for use with ZPH202 pH meter 12.3mm dia x 160mm Epoxy body, 1-13pH &n
A range of encapsulated solar cell modules mounted in sturdy black polycarbonate cases. The faceplate consists of tiny bubble magnifiers which maximise performance by enhancing light as it strikes the cell. Monocrystalline constructi
Practical paper chromatography offers motivational learning opportunities, but relies on standard analytical grade papers or much less satisfactory alternatives such paper towelling. Select School Supplies can now offer a really low-cost al
This rotary vacuum pump is ideal for all general laboratory applications. Quiet operation, and easy to use. supplied with oil. 1 STAGE VACUUM PUMP Free air displacement-2.0 CFM Ultimate Vacuum : 150 micron
Highly sensitive galvanometer having a multiple deflection system. Long scale of 18cm, marked 0-18cm and 9-0-9cm rule divided into 180 division. Fitted with 'Zero Setting' system to set the spot galvanometer. Fitted with a scale locking fu
S.B.C. double contact brass, lamp holder mounted on rectangular moulded base, with two 4mm socket connections.
SATZ ZPS15 School Power Station Output Voltage selectable: 3V, 4.5V, 6V, 7.5V. 9V, 12V DC Output Current: ZSP15 1.5A - ZSP30 3A Output : Smoothed and regulated Ripple & Noise: less th
ZSC-98A School Stopclock The ZSC98A is specifically designed for use in schools. The highly accurate quartz stopclock is housed in a robust ABS casing. The two buttons are large and colour coded for clarity. The LCD display is also large and clear
SATZ ZPS30 School Power Station Output Voltage selectable: 3V, 4.5V, 6V, 7.5V. 9V, 12V DC Output Current: ZSP15 1.5A - ZSP30 3A Output : Smoothed and regulated Ripple & Noise: less th
Versatile Flexible Neck Integral On/ Off Switch Bulb: E14 35w Halogen Candle or 9w Energy Saver Bulb (Not Included) Height Approx 34cm
Input supply voltage 230V DC. Supplyfrequency 50Hz. Output voltage 2, 4, 6, 8, 10, 12V ACnominal 1, 3, 5, 7, 9, 11V full waverectified DC nominal. Mains fuse rear panel 2A, 20mm quickblow mains plug 3
Showing products per page
Regulated DC Power Supply 3V-12V/3A (6 Outputs) DC power supply unit provides regulated DC output voltage with excellent load and line regulation. Description • Compact and Light Weight Design • Fire
SATZ ZPS15 School Power Station Output Voltage selectable: 3V, 4.5V, 6V, 7.5V. 9V, 12V DC Output Current: ZSP15 1.5A - ZSP30 3A Output : Smoothed and regulated Ripple & Noise: less th
The ring launcher consists of a vertically mounted solenoid of thick copper wire with an iron core. The coil is energized with by pressing the push button on the panel. Two aluminium rings are supplied with the apparatus. These rings
A compact kit to illustrate the way electricity is transported around the country. Compri ses two boxes (step up substation and step down substation) and a set of ‚Äö√Ñ√∂‚àö√&e
A floating, high voltage power source useful for supplying charge for quantitative electrostatic experiments, gas discharge tubes needing a filament supply and spectrum tubes. Continuously variable output up to 5kV. 6V/1A AC or 12V/0.5A AC filamen
Sufficient for approximately 500 sample spots) A mixture of cyan, magenta, blue inks which appear black when mixed and separates out into bright constituent colours when subject to card chromatography or electrophoresis.
For use with the motor to demonstrate the \nproduction of electrical energy directly from \nlight energy. The apparatus comprises a \nselenium photo-voltic cell.
A 250W tungsten filament bulb available with screw fitting, internally silvered.
A solar kit incorporating 3 independent modules within a sealed miniature solar panel, enabling a range \nof experiments using voltages between 1.5V and 4.5V and outputs from 100mA up to 300mA. \nComplete with stand, low-inertia DC motor, motor st
A range of encapsulated solar cell modules mounted in sturdy black polycarbonate cases. The faceplate consists of tiny bubble magnifiers which maximise performance by enhancing light as it strikes the cell. Monocrystalline constructi
A range of encapsulated solar cell modules mounted in sturdy black polycarbonate cases. The faceplate consists of tiny bubble magnifiers which maximise performance by enhancing light as it strikes the cell. Monocrystalline constructi
To produce mechanical vibrations when used with a signal generator. The unit is \nmounted on a strong base and is enclosed in a plastic case. A threaded extension \nof the armature allows attachment of the item to be vibrated, e.g., plates for chl
Regulated DC Power Supply 3V-12V/3A (6 Outputs) DC power supply unit provides regulated DC output voltage with excellent load and line regulation Description • Compact and Light Weight Design • Fire r
The (AFR-EJ1 is a 1Kg compact stainless steel weighing scale with a 0.1g weighing resolution. It has a rugged stainless steel construction throughout, it is a hard wearing scale that can stand up to t
The Bench Top Battery eliminator is designed to give the most popular battery voltages. Substitutes a wide variety of batteries including AA, AAA, C, D, and 9 V types. The voltage is conveniently sele
S.B.C. double contact brass, lamp holder mounted on rectangular moulded base, with two 4mm socket connections.
The Bench Top Battery eliminator is designed to give the most popular battery voltages. Substitutes a wide variety of batteries including AA, AAA, C, D, and 9 V types. The voltage is conveniently sele
The Supertex power supply is the first of a new range of products exclusive \ndesigned and developed to meet the needs of schools. \nOffering 1-12V output of both AC and full wave rectified DC the power supply is ideal \nfor general laboratory use
The Bench Top battery powered digital meters measures DC voltages / current. The special IC circuit provides features like auto zero and auto polarity detection. 0-19.99 Amp . Power: 1 x 9v PP3 battery supplied
The Supertek power supply is the first of a new range of products exclusive \ndesigned and developed to meet the needs of schools. \nOffering 1-12V output of both AC and full wave rectified DC the power supply is ideal \nfor general laboratory use
Ideal for classroom demonstration, this hydroelectric power station model allows students to directly observe the process of conversion of water flow to electrical energy that occurs in hydroelectric power plants. The water turbine is mounted on a
For use with the mounted solar cell or on its own. A12V, 24W S.B.C. bulb in a metal socket mounted on a base with pair of 4 mm sockets
Resistance varies with the intensity of light falling on the unit.
Rheostat of excellent quality. They are wound with heavily oxidized resistance wire upon a vitreous \nenameled steel tube. The winding is locked into place with ceramic cement. The tube is carried upon \nrobust enameled die-cast end stands. 4mm so
The ADM-931 digital multimeter is suitable for use by electricians, electronic engineers, general industry & laboratories. It is EN61010-1 CAT III 600V, CATII 1000V rated. A large high contrast LCD, a single positive action ro
PE-03 PH Electrode - Laboratory and Field Use Suitable for use with ZPH202 pH meter 12.3mm dia x 160mm Epoxy body, 1-13pH &n
A range of encapsulated solar cell modules mounted in sturdy black polycarbonate cases. The faceplate consists of tiny bubble magnifiers which maximise performance by enhancing light as it strikes the cell. Monocrystalline constructi
Practical paper chromatography offers motivational learning opportunities, but relies on standard analytical grade papers or much less satisfactory alternatives such paper towelling. Select School Supplies can now offer a really low-cost al
This rotary vacuum pump is ideal for all general laboratory applications. Quiet operation, and easy to use. supplied with oil. 1 STAGE VACUUM PUMP Free air displacement-2.0 CFM Ultimate Vacuum : 150 micron
Highly sensitive galvanometer having a multiple deflection system. Long scale of 18cm, marked 0-18cm and 9-0-9cm rule divided into 180 division. Fitted with 'Zero Setting' system to set the spot galvanometer. Fitted with a scale locking fu
S.B.C. double contact brass, lamp holder mounted on rectangular moulded base, with two 4mm socket connections.
SATZ ZPS15 School Power Station Output Voltage selectable: 3V, 4.5V, 6V, 7.5V. 9V, 12V DC Output Current: ZSP15 1.5A - ZSP30 3A Output : Smoothed and regulated Ripple & Noise: less th
ZSC-98A School Stopclock The ZSC98A is specifically designed for use in schools. The highly accurate quartz stopclock is housed in a robust ABS casing. The two buttons are large and colour coded for clarity. The LCD display is also large and clear
SATZ ZPS30 School Power Station Output Voltage selectable: 3V, 4.5V, 6V, 7.5V. 9V, 12V DC Output Current: ZSP15 1.5A - ZSP30 3A Output : Smoothed and regulated Ripple & Noise: less th
Versatile Flexible Neck Integral On/ Off Switch Bulb: E14 35w Halogen Candle or 9w Energy Saver Bulb (Not Included) Height Approx 34cm
Input supply voltage 230V DC. Supplyfrequency 50Hz. Output voltage 2, 4, 6, 8, 10, 12V ACnominal 1, 3, 5, 7, 9, 11V full waverectified DC nominal. Mains fuse rear panel 2A, 20mm quickblow mains plug 3
Showing products per page