Desktop
- MENU
Home
E-Catalogues
Login
Basket
Tablet & Mobile
01691 770366 | sales@selectschoolsupplies.co.uk
- MENU
Home
E-Catalogues
Login
Basket
- MENU
-
Chemistry
-
Desktop
Tablet & Mobile
01691 770366 | sales@selectschoolsupplies.co.uk
Moulded in polypropylene, consist of spoon at one end, while other end is flat. Size 15cm.
Strong magnets enclosed in tough plastic outer casings colour coded red for north and blue for south. 80 x 22 x 10mm
To Observe the effects of electric currents on liquids. Eudiometer tube having capacity of 50 ml and graduation of 0.2 ml is made of strudy Borosilicate glass with a large center reservoir bulb. The unit comes with a stand and a pair each of carbo
Made from Borosilicate 3.3 glass, with rim. uniform wall thickness. Conformity to ISO 4142.
Housed in black metal body, specially molded spectrum tube sockets enable the tube to be placed in position easily and also provides protection against electrical contact. Bottom socket is spring loaded for easy tube
Made in polystyrene. With four vents. Supplied in groups of 10 units, packaged in heat sealed bags. Suitable for automatic filling machines.
The jaws are covered with silicone. Overall length of tong 30cm approx. Made of steel chrome plated.
Simple, innovative kit allows you to perform a number of experiments on vacuum and air pressure. The kit clearly demonstrates the method by which a pump works. Also illustrates that air has mass and helps find its mass and density. Explain the eff
These racks can conveniently hold inverted tubes for drying purpose and minimize collection of air borne contaminants inside the tube. The rack can also be used to hold and dry electrophoresis and chromatography plates. 90 Pegs for
A brightly colored red and blue plastic test tube rack holds five large test tubes. The five holes are 32 mm diameter and it quickly disassembles for storage.
Easy to use, safe to operate and is designed for trouble free continues operation. Suitable for general laboratory use. Features: The still produces 4 litres/hr of distilled water through a 3 kW heater housed in a horizontal b
Made in polystyrene. Aseptic. With four vents and a √ò 90 x 15mm internal cross . Stackable. With a mark on a side that helps orientation and a wr
Extra soft quality confirms to Govt. specifications, resistance to acids and alkalis Pack of 10Mtr.
Plated spring steel wire holder with finger grip. The jaws will accept tubes up to 40mm dia. Overall length 16cm.
A brightly colored red and blue plastic test tube rack holds five large test tubes. The five holes are 32 mm diameter and it quickly disassembles for storage.
The apparatus is designed to study waves. It consists of a metal frame provided with acrylic tray and can be used as a standing bench model. This demonstration model can be used with an overhead projector or as an economical model. An illuminant u
General Featues * Well proportioned stable, rigid and vertical body inclinable through 90°. * Eye tube is inclined at 45°. * Separate knobs for coarse and fine focussing. Coarse knobs are with tension
The apparatus is designed to study waves. It consists of a metal frame provided with acrylic tray and can be used as a standing bench model. This demonstration model can be used with an overhead projector or as an economical model. An illuminant u
The GM Tube & Holder (IPC-6200-R) has been designed to work directly with our Timer Scaler & Frequency Meter (IPC-3342-T) but can also be used with any other suitable Scaler unit. The GM Tube containe
A multi-purpose instrument (IPC-3342-T) which is invaluable in the physics laboratory, combining the functions of a multi-purpose timer, a ratemeter and a frequency meter in one compact and economical
For demonstrating transverse waves, wave propagation, wave reflection, standard waves & nodal points. Plated steel dia. 20mm and length 2 meters.
Output 12V AC, 21 W for illuminant and 0 – 3V DC. variable for ripple motor. Operates from 220 -240V A.C. mains Size 176 x 205 x 128mm (LxWxH) Weight 2Kg
Bulb type for pipetting noxious solutions, microbial suspensions etc. Comprises a bulb and three pinch valves controlling influx and efflux of pipette contents. Bulb diameter is 54mm.
With diamond scribing point on spring arm and aluminium alloy body with V - grove. Suitable for use with soda and borosilicate glass tubing.
Extra soft quality confirms to Govt. specifications, resistance to acids and alkalis Pack of 10Mtr.
Stainless steel, double ended with trowel-shaped scoops for handling large quantities of material. Length 175 mm and mean width 15 mm
NUFFIELD’ pattern, with scoop at one end and a bent-up flat blade at the other.
Extra length allows student more time to observe ÔøºÔøºÔøºÔøºÔøºÔøºÔøºÔøºwave behaviour. Extra-long sli
Sine and square wave generator (IPC-4744-W). Frequency range 5Hz to 50kHz in four switched ranges plus a fine control. Accuracy typically ±10%. The output amplitude is continuously variable from zero
Extra soft quality confirms to Govt. specifications, resistance to acids and alkalis Pack of 10Mtr.
Made of neutral glass, bulb form single graduation on upper stem, permanent blue stained graduation
Extra soft quality confirms to Govt. specifications, resistance to acids and alkalis Pack of 10Mtr.
Extra soft quality confirms to Govt. specifications, resistance to acids and alkalis Pack of 10Mtr.
Made of neutral glass, bulb form single graduation on upper stem, permanent blue stained graduation
Made of neutral glass, bulb form single graduation on upper stem, permanent blue stained graduation
This coaxial lead is specifically designed to connect any GM Tube or GM Tube Holder with a BNC plug connector to our Timer Scaler and Frequency Meter
This Standard Radiation Test Source using K-40 (IPC-6225-R) allows school laboratories to perform their own GM Tube (eg. ZP1481) and Scaler operating efficiency testing. The test source comprises of a
A highly visible instrument for showing the random nature of radiation (IPC-6001-R). Produces very bright sparks when alpha particles are ionised on the circular wire grid. Comes complete with sliding
The Microslide® Viewer is a precision device used to view Microslide® photographic slide strips at magnifications from whole mounts to 450,000x. It is not a microscope. Made of high-impact polystyrene with no painted or removable par
General Features \n* Pressure die-cast parts to ensure strength. \n* Well proportioned stable, rigid and vertical body \ninclinable through 90°. \n* Mechanical tube length 160 mm. \n* Separate knobs for coarse and fine focussing. \n* Tr
Showing products per page
Moulded in polypropylene, consist of spoon at one end, while other end is flat. Size 15cm.
Strong magnets enclosed in tough plastic outer casings colour coded red for north and blue for south. 80 x 22 x 10mm
To Observe the effects of electric currents on liquids. Eudiometer tube having capacity of 50 ml and graduation of 0.2 ml is made of strudy Borosilicate glass with a large center reservoir bulb. The unit comes with a stand and a pair each of carbo
Made from Borosilicate 3.3 glass, with rim. uniform wall thickness. Conformity to ISO 4142.
Housed in black metal body, specially molded spectrum tube sockets enable the tube to be placed in position easily and also provides protection against electrical contact. Bottom socket is spring loaded for easy tube
Made in polystyrene. With four vents. Supplied in groups of 10 units, packaged in heat sealed bags. Suitable for automatic filling machines.
The jaws are covered with silicone. Overall length of tong 30cm approx. Made of steel chrome plated.
Simple, innovative kit allows you to perform a number of experiments on vacuum and air pressure. The kit clearly demonstrates the method by which a pump works. Also illustrates that air has mass and helps find its mass and density. Explain the eff
These racks can conveniently hold inverted tubes for drying purpose and minimize collection of air borne contaminants inside the tube. The rack can also be used to hold and dry electrophoresis and chromatography plates. 90 Pegs for
A brightly colored red and blue plastic test tube rack holds five large test tubes. The five holes are 32 mm diameter and it quickly disassembles for storage.
Easy to use, safe to operate and is designed for trouble free continues operation. Suitable for general laboratory use. Features: The still produces 4 litres/hr of distilled water through a 3 kW heater housed in a horizontal b
Made in polystyrene. Aseptic. With four vents and a √ò 90 x 15mm internal cross . Stackable. With a mark on a side that helps orientation and a wr
Extra soft quality confirms to Govt. specifications, resistance to acids and alkalis Pack of 10Mtr.
Plated spring steel wire holder with finger grip. The jaws will accept tubes up to 40mm dia. Overall length 16cm.
A brightly colored red and blue plastic test tube rack holds five large test tubes. The five holes are 32 mm diameter and it quickly disassembles for storage.
The apparatus is designed to study waves. It consists of a metal frame provided with acrylic tray and can be used as a standing bench model. This demonstration model can be used with an overhead projector or as an economical model. An illuminant u
General Featues * Well proportioned stable, rigid and vertical body inclinable through 90°. * Eye tube is inclined at 45°. * Separate knobs for coarse and fine focussing. Coarse knobs are with tension
The apparatus is designed to study waves. It consists of a metal frame provided with acrylic tray and can be used as a standing bench model. This demonstration model can be used with an overhead projector or as an economical model. An illuminant u
The GM Tube & Holder (IPC-6200-R) has been designed to work directly with our Timer Scaler & Frequency Meter (IPC-3342-T) but can also be used with any other suitable Scaler unit. The GM Tube containe
A multi-purpose instrument (IPC-3342-T) which is invaluable in the physics laboratory, combining the functions of a multi-purpose timer, a ratemeter and a frequency meter in one compact and economical
For demonstrating transverse waves, wave propagation, wave reflection, standard waves & nodal points. Plated steel dia. 20mm and length 2 meters.
Output 12V AC, 21 W for illuminant and 0 – 3V DC. variable for ripple motor. Operates from 220 -240V A.C. mains Size 176 x 205 x 128mm (LxWxH) Weight 2Kg
Bulb type for pipetting noxious solutions, microbial suspensions etc. Comprises a bulb and three pinch valves controlling influx and efflux of pipette contents. Bulb diameter is 54mm.
With diamond scribing point on spring arm and aluminium alloy body with V - grove. Suitable for use with soda and borosilicate glass tubing.
Extra soft quality confirms to Govt. specifications, resistance to acids and alkalis Pack of 10Mtr.
Stainless steel, double ended with trowel-shaped scoops for handling large quantities of material. Length 175 mm and mean width 15 mm
NUFFIELD’ pattern, with scoop at one end and a bent-up flat blade at the other.
Extra length allows student more time to observe ÔøºÔøºÔøºÔøºÔøºÔøºÔøºÔøºwave behaviour. Extra-long sli
Sine and square wave generator (IPC-4744-W). Frequency range 5Hz to 50kHz in four switched ranges plus a fine control. Accuracy typically ±10%. The output amplitude is continuously variable from zero
Extra soft quality confirms to Govt. specifications, resistance to acids and alkalis Pack of 10Mtr.
Made of neutral glass, bulb form single graduation on upper stem, permanent blue stained graduation
Extra soft quality confirms to Govt. specifications, resistance to acids and alkalis Pack of 10Mtr.
Extra soft quality confirms to Govt. specifications, resistance to acids and alkalis Pack of 10Mtr.
Made of neutral glass, bulb form single graduation on upper stem, permanent blue stained graduation
Made of neutral glass, bulb form single graduation on upper stem, permanent blue stained graduation
This coaxial lead is specifically designed to connect any GM Tube or GM Tube Holder with a BNC plug connector to our Timer Scaler and Frequency Meter
This Standard Radiation Test Source using K-40 (IPC-6225-R) allows school laboratories to perform their own GM Tube (eg. ZP1481) and Scaler operating efficiency testing. The test source comprises of a
A highly visible instrument for showing the random nature of radiation (IPC-6001-R). Produces very bright sparks when alpha particles are ionised on the circular wire grid. Comes complete with sliding
The Microslide® Viewer is a precision device used to view Microslide® photographic slide strips at magnifications from whole mounts to 450,000x. It is not a microscope. Made of high-impact polystyrene with no painted or removable par
General Features \n* Pressure die-cast parts to ensure strength. \n* Well proportioned stable, rigid and vertical body \ninclinable through 90°. \n* Mechanical tube length 160 mm. \n* Separate knobs for coarse and fine focussing. \n* Tr
Showing products per page