Desktop
Tablet & Mobile
01691 770366 | sales@selectschoolsupplies.co.uk
- MENU
-
Chemistry
-
Desktop
Tablet & Mobile
01691 770366 | sales@selectschoolsupplies.co.uk
Closely wound with loops at both sides, diameter 6mm approx., wire of 19 swg 150mm diameter Extension for 200g load 230mm
Demonstrates the transmission of pressure by a liquid, the compressibility of gases, and Archimedes Principle. The set consists of a Cartesian diver, glass cylinder, a rubber diaphragm, and instructions.
Each plate is fitted with a 4 mm socket terminal
Moving Coil DC Ammeter (EDM-80). Scale Length approx. 60 mm with anti-parallax mirror scale, dial size 72 x 72 mm with color coded terminals. Overall size 90 x 110 x 125 mm approx. Accuracy : ±2%
Moving Coil DC Ammeter (EDM-80). Scale Length approx. 60 mm with anti-parallax mirror scale, dial size 72 x 72 mm with color coded terminals. Overall size 90 x 110 x 125 mm approx. Accuracy : ±2%
Moving Coil DC Voltmeter (EDM-80). Scale Length approx. 60 mm with anti-parallax mirror scale, dial size 72 x 72 mm with color coded terminals. Overall size 90 x 110 x 125 mm approx. Accuracy : ±2%
A range of units where a highly stable resistance coil is placed inside a plastic box. Connection are made via 4 mm terminals. Accuracy ± 1%.
A range of units where a highly stable resistance coil is placed inside a plastic box. Connection are made via 4 mm terminals. Accuracy ± 1%.
Steel shaft, pulley of 70 mm diameter Shaft overhangs the base to allow a wound up weight to fall down.
The unit consists of a wooden base with upper and a lower platform. The upper platform has a hole to allow use as a simple circulation system with a single reservoir. Includes two glass basins and shaped glass tubes. This unit is used as an access
Hollow wooden sounding box 1290 x 130 x 110 mm, with mm scale, has two fixed bridges 72 cm apart over which wires are stretched. To one wire is fitted a spring balance reading to 100 N x 5 N and its tension can be adjusted by a winged nut and meas
A simple form of D.C. motor with 2 pole armature wound with insulated copper wire and a permanent magnetic field provided by a removable bar magnet, with a commutator and phosphor bronze brushes connected to 4 mm sockets, open construction, all pa
Vary the current in a circuit using this rheostat. Supplied with 11ohm coil.
Single cell holder with 4mm sockets, ingeniously molded so a cell can only be inserted the correct way around. Takes one D cell (not included).
To perform all electrostatic \nexperiments, especially where \ncontinuous production of a high \nvoltage is required. It consists of an \naluminium dome dia. 250mm \napprox. and a separate discharging \naluminium dome dia. 130mm \napprox. The char
A red spirit filled thermometer yellow backed -10 to 110. 150mm long.
An electric bell 3 - 6 V AC / DC suspended in a bell jar, fitted with rubber bung and connector terminals.
To demonstrate conservation of energy, conservation of momentum and projectile motion. Consists of a metal track to drop a steel ball, circular scale for measuring the angle at which the ball drops. Includes two steel balls and instructions. Size:
The Chladni Plates Kit allows the continuous vibrations to be produced at measurable frequencies to determine the resonant frequencies of the plates and examine the modes of vibration at any frequency. A thin layer of s
The Highland offers advanced features in a compact, durable balance that stacks for easy storage. Suitable for many tasks, Highland provides fast, accurate weighing in a number of different environments ‚ from science research in t
The Highland offers advanced features in a compact, durable balance that stacks for easy storage. Suitable for many tasks, Highland provides fast, accurate weighing in a number of different environments ‚ from science research in t
The Highland offers advanced features in a compact, durable balance that stacks for easy storage. Suitable for many tasks, Highland provides fast, accurate weighing in a number of different environments ‚ from science research in t
The Core is an outstanding value, providing easy operation and a portable solution for any basic precision weighing tasks. An innovative stackable design saves space, so the Core lends itself well to science classrooms or busy labs.
The Core is an outstanding value, providing easy operation and a portable solution for any basic precision weighing tasks. An innovative stackable design saves space, so the Core lends itself well to science classrooms or busy labs.
The Core is an outstanding value, providing easy operation and a portable solution for any basic precision weighing tasks. An innovative stackable design saves space, so the Core lends itself well to science classrooms or busy labs.
Pan size 145mm x 145mm With simple, three-button operation and sturdy plastic construction, the portable Dune compact balance is a smart choice for labs. It quickly delivers precision readings on a large display, so results are easy
Pan size 100mm With simple, three-button operation and sturdy plastic construction, the portable Dune compact balance is a smart choice for labs. It quickly delivers precision readings on a large display, so results are easy to read
An easy to use compact infared thermometer which allows the user to measure the temperature of objects from a distance. Comes with a illuminated LCD diplay and data hold fuction. Requires 2 x AA batteries
We realise that space is important and that is why we designed a compact and low voltage power supply for schools that saves on space and on setup time! - With up to 70% reduction in storage space by simply offe
A 1 farad capacitor that can be used for energy storage. Securely fixed and mounted on o sealed ABS enclosure with non slip rubber feet. Connections made by two polarised 4mm plug in sockets includes Non slip rubber feet
A robust Magnetic Switch module for use with the BrightSparks 4kids range of modules Large glass body with easy to see contacts Module designed for 1.5 - 6VDC circuits Connections made by two unpolarised 4mm plug in sockets
A robust L.E.D module for use with the BrightSparks 4kids range of modules. Operating Voltage 2.5 - 6VDC Fitted with internal current limiting resistor. Connections made by two polarised 4mm plug in sockets
A robust L.E.D module for use with the BrightSparks 4kids range of modules. Operating Voltage 2.5 - 6VDC Fitted with internal current limiting resistor. Connections made by two polarised 4mm plug in sockets includes Non
A robust bulb module for use with the BrightSparks 4kids range of modules. Operating Voltage 1.5 - 6VDC Maximum Bulb rating 12Volts 200mA Connections made by two unpolarised 4mm plug in sockets includes Non slip rubber
A robust 100R Variable Resistor module for use with the BrightSparks 4kids range of modules. Module designed for 1.5 - 6VDC circuits Connections made by two unpolarised 4mm plug in sockets includes Non slip rubber feet
Showing products per page
Closely wound with loops at both sides, diameter 6mm approx., wire of 19 swg 150mm diameter Extension for 200g load 230mm
Demonstrates the transmission of pressure by a liquid, the compressibility of gases, and Archimedes Principle. The set consists of a Cartesian diver, glass cylinder, a rubber diaphragm, and instructions.
Each plate is fitted with a 4 mm socket terminal
Moving Coil DC Ammeter (EDM-80). Scale Length approx. 60 mm with anti-parallax mirror scale, dial size 72 x 72 mm with color coded terminals. Overall size 90 x 110 x 125 mm approx. Accuracy : ±2%
Moving Coil DC Ammeter (EDM-80). Scale Length approx. 60 mm with anti-parallax mirror scale, dial size 72 x 72 mm with color coded terminals. Overall size 90 x 110 x 125 mm approx. Accuracy : ±2%
Moving Coil DC Voltmeter (EDM-80). Scale Length approx. 60 mm with anti-parallax mirror scale, dial size 72 x 72 mm with color coded terminals. Overall size 90 x 110 x 125 mm approx. Accuracy : ±2%
A range of units where a highly stable resistance coil is placed inside a plastic box. Connection are made via 4 mm terminals. Accuracy ± 1%.
A range of units where a highly stable resistance coil is placed inside a plastic box. Connection are made via 4 mm terminals. Accuracy ± 1%.
Steel shaft, pulley of 70 mm diameter Shaft overhangs the base to allow a wound up weight to fall down.
The unit consists of a wooden base with upper and a lower platform. The upper platform has a hole to allow use as a simple circulation system with a single reservoir. Includes two glass basins and shaped glass tubes. This unit is used as an access
Hollow wooden sounding box 1290 x 130 x 110 mm, with mm scale, has two fixed bridges 72 cm apart over which wires are stretched. To one wire is fitted a spring balance reading to 100 N x 5 N and its tension can be adjusted by a winged nut and meas
A simple form of D.C. motor with 2 pole armature wound with insulated copper wire and a permanent magnetic field provided by a removable bar magnet, with a commutator and phosphor bronze brushes connected to 4 mm sockets, open construction, all pa
Vary the current in a circuit using this rheostat. Supplied with 11ohm coil.
Single cell holder with 4mm sockets, ingeniously molded so a cell can only be inserted the correct way around. Takes one D cell (not included).
To perform all electrostatic \nexperiments, especially where \ncontinuous production of a high \nvoltage is required. It consists of an \naluminium dome dia. 250mm \napprox. and a separate discharging \naluminium dome dia. 130mm \napprox. The char
A red spirit filled thermometer yellow backed -10 to 110. 150mm long.
An electric bell 3 - 6 V AC / DC suspended in a bell jar, fitted with rubber bung and connector terminals.
To demonstrate conservation of energy, conservation of momentum and projectile motion. Consists of a metal track to drop a steel ball, circular scale for measuring the angle at which the ball drops. Includes two steel balls and instructions. Size:
The Chladni Plates Kit allows the continuous vibrations to be produced at measurable frequencies to determine the resonant frequencies of the plates and examine the modes of vibration at any frequency. A thin layer of s
The Highland offers advanced features in a compact, durable balance that stacks for easy storage. Suitable for many tasks, Highland provides fast, accurate weighing in a number of different environments ‚ from science research in t
The Highland offers advanced features in a compact, durable balance that stacks for easy storage. Suitable for many tasks, Highland provides fast, accurate weighing in a number of different environments ‚ from science research in t
The Highland offers advanced features in a compact, durable balance that stacks for easy storage. Suitable for many tasks, Highland provides fast, accurate weighing in a number of different environments ‚ from science research in t
The Core is an outstanding value, providing easy operation and a portable solution for any basic precision weighing tasks. An innovative stackable design saves space, so the Core lends itself well to science classrooms or busy labs.
The Core is an outstanding value, providing easy operation and a portable solution for any basic precision weighing tasks. An innovative stackable design saves space, so the Core lends itself well to science classrooms or busy labs.
The Core is an outstanding value, providing easy operation and a portable solution for any basic precision weighing tasks. An innovative stackable design saves space, so the Core lends itself well to science classrooms or busy labs.
Pan size 145mm x 145mm With simple, three-button operation and sturdy plastic construction, the portable Dune compact balance is a smart choice for labs. It quickly delivers precision readings on a large display, so results are easy
Pan size 100mm With simple, three-button operation and sturdy plastic construction, the portable Dune compact balance is a smart choice for labs. It quickly delivers precision readings on a large display, so results are easy to read
An easy to use compact infared thermometer which allows the user to measure the temperature of objects from a distance. Comes with a illuminated LCD diplay and data hold fuction. Requires 2 x AA batteries
We realise that space is important and that is why we designed a compact and low voltage power supply for schools that saves on space and on setup time! - With up to 70% reduction in storage space by simply offe
A 1 farad capacitor that can be used for energy storage. Securely fixed and mounted on o sealed ABS enclosure with non slip rubber feet. Connections made by two polarised 4mm plug in sockets includes Non slip rubber feet
A robust Magnetic Switch module for use with the BrightSparks 4kids range of modules Large glass body with easy to see contacts Module designed for 1.5 - 6VDC circuits Connections made by two unpolarised 4mm plug in sockets
A robust L.E.D module for use with the BrightSparks 4kids range of modules. Operating Voltage 2.5 - 6VDC Fitted with internal current limiting resistor. Connections made by two polarised 4mm plug in sockets
A robust L.E.D module for use with the BrightSparks 4kids range of modules. Operating Voltage 2.5 - 6VDC Fitted with internal current limiting resistor. Connections made by two polarised 4mm plug in sockets includes Non
A robust bulb module for use with the BrightSparks 4kids range of modules. Operating Voltage 1.5 - 6VDC Maximum Bulb rating 12Volts 200mA Connections made by two unpolarised 4mm plug in sockets includes Non slip rubber
A robust 100R Variable Resistor module for use with the BrightSparks 4kids range of modules. Module designed for 1.5 - 6VDC circuits Connections made by two unpolarised 4mm plug in sockets includes Non slip rubber feet
Showing products per page