Desktop
Tablet & Mobile
01691 770366 | sales@selectschoolsupplies.co.uk
- MENU
-
Chemistry
-
Desktop
Tablet & Mobile
01691 770366 | sales@selectschoolsupplies.co.uk
Building on the success of the SEP Energymeter, this new USB version boasts datalogging and an improved specification: Current range: ±7A (current can flow in either direction) Voltage range: ±25V
The SEP Wind Turbine is ready-assembled and can be used to carry out a wide range of experiments on wind power. The blades of the turbine can be easily attached, removed or adjusted, allowing students to investigate the effects of changing the num
Enables students to investigate nature and properties of electricity by using simple circuits which are easily constructed on a base board. The connector system uses P.C.B. strips with cut-out sections whose ends can easily be inserted in spring t
Enables students to investigate nature and properties of electricity by using simple circuits which are easily constructed on a base board. The connector system uses P.C.B. strips with cut-out sections whose ends can easily be inserted in spring t
With transparent glass body. Quick blow type. 20 mm long and dia. 5 mm.
RoHS Compliant 13A Rated 3-pin UK mains plugs manufactured from nylon and urea The plugs have a quickfit type cord grip BS1363 approved (fitted with BS approved fuse
A robust normally closed Push Switch module for use with the BrightSparks 4kids range of modules. Module designed for 1.5 - 6VDC circuits Connections made by two unpolarised 4mm plug in sockets includes Non slip rubber feet
The Brightsparks4kids Electricity Kit containing 10 essential component modules to design, build and understand your own simple circuits. Contents include; • 3 x Battery Cell modules (short circuit protected) • 2 x Bulb mod
A robust low inertia Motor Fan module for use with Solar cells and the BrightSparks 4kids range of modules. Operating Voltage 1.5 - 6VDC Connections made by two polarised 4mm plug in sockets includes Non slip rubber fee
A robust L.E.D module for use with the BrightSparks 4kids range of modules. Operating Voltage 2.5 - 6VDC Fitted with internal current limiting resistor. Connections made by two polarised 4mm plug in sockets includes Non
Double ‚Äò‚ÄôC‚Äô‚Äô core and holding clip. A laminated, rounded-rectangle core with square cross-section, which has been cut across the middle to produce two equal C‚&Aum
A range of units where a highly stable resistance coil is placed inside a plastic box. Connection are made via 4 mm terminals. Accuracy ± 1%.
Each plate is fitted with a 4 mm socket terminal
Moving Coil DC Galvanometer (EDM-100). Scale Length approx. 85 mm with anti-parallax mirror scale, dial size 80 x 100 mm with color coded terminals. Overall size 100 x 100 x 140 mm approx. Accuracy : ±2% FSD. -35-0-35mV
Each wound on a rectangular insulated bobbin, connections by 4mm sockets spaced at 19mm.
Each wound on a rectangular insulated bobbin, connections by 4mm sockets spaced at 19mm.
Glass jar 15 x 10cm length x dia. Complete with zinc and copper plates. 90 x 25 x 1.5mm
The Bench Top Micro voltmeter is an effective and robust replacement for a spot galvanometer, with 9 ranges from 100μV to 1V. The input resistance of 1kΩ gives 10MΩ/V on 100μV range, which is consider
To demonstrate electromagnetic induction and transformer principles. Primary coil with 175 turns, secondary coil with three different windings 500; 1,000 and 1,500 turns. Coils are wound on molded pip
To hold up to four D cells beneath it enables use of one, two, three or four cells
The moving coil multi-range ammeter can be used to measure A.C. as well as D.C. currents. The operation of these meters depend on the interaction between the field of permanent magnet and moving coil
Terminals on these lamp boards let you connect lamps in series or parallel. Lamp board features removable shunt wires that allow for quick changing from parallel to series or any combinations of the t
Ultra Max Long life rechargeable batteries. Recharge up to 1000 times, compatible with any brand of charger. Come ready charged Size AAA Pk4
For AA AAA C D and 9v (PP3) NiMH/NiCD rechargeable batteries Charging indicator lights (does not indicate when fully charged) Polarity reverse protection Plugs into any standard UK wall socket Charges
Spade shaped standard terminal with 4 mm socket connector to convert screw terminal for use with 4 mm plug connection. 1 red and 1 black
13A extension lead. Neon power indicator. Individual switches for each plug.
Electrical insulation tape in a range of fade-resistant colours. Rubber glue on PVC carrier with good elasticity and elongation properties allowing conformity to irregular surfaces. Provides moisture-
Electrical insulation tape in a range of fade-resistant colours. Rubber glue on PVC carrier with good elasticity and elongation properties allowing conformity to irregular surfaces. Provides moisture-
Showing products per page
Building on the success of the SEP Energymeter, this new USB version boasts datalogging and an improved specification: Current range: ±7A (current can flow in either direction) Voltage range: ±25V
The SEP Wind Turbine is ready-assembled and can be used to carry out a wide range of experiments on wind power. The blades of the turbine can be easily attached, removed or adjusted, allowing students to investigate the effects of changing the num
Enables students to investigate nature and properties of electricity by using simple circuits which are easily constructed on a base board. The connector system uses P.C.B. strips with cut-out sections whose ends can easily be inserted in spring t
Enables students to investigate nature and properties of electricity by using simple circuits which are easily constructed on a base board. The connector system uses P.C.B. strips with cut-out sections whose ends can easily be inserted in spring t
With transparent glass body. Quick blow type. 20 mm long and dia. 5 mm.
RoHS Compliant 13A Rated 3-pin UK mains plugs manufactured from nylon and urea The plugs have a quickfit type cord grip BS1363 approved (fitted with BS approved fuse
A robust normally closed Push Switch module for use with the BrightSparks 4kids range of modules. Module designed for 1.5 - 6VDC circuits Connections made by two unpolarised 4mm plug in sockets includes Non slip rubber feet
The Brightsparks4kids Electricity Kit containing 10 essential component modules to design, build and understand your own simple circuits. Contents include; • 3 x Battery Cell modules (short circuit protected) • 2 x Bulb mod
A robust low inertia Motor Fan module for use with Solar cells and the BrightSparks 4kids range of modules. Operating Voltage 1.5 - 6VDC Connections made by two polarised 4mm plug in sockets includes Non slip rubber fee
A robust L.E.D module for use with the BrightSparks 4kids range of modules. Operating Voltage 2.5 - 6VDC Fitted with internal current limiting resistor. Connections made by two polarised 4mm plug in sockets includes Non
Double ‚Äò‚ÄôC‚Äô‚Äô core and holding clip. A laminated, rounded-rectangle core with square cross-section, which has been cut across the middle to produce two equal C‚&Aum
A range of units where a highly stable resistance coil is placed inside a plastic box. Connection are made via 4 mm terminals. Accuracy ± 1%.
Each plate is fitted with a 4 mm socket terminal
Moving Coil DC Galvanometer (EDM-100). Scale Length approx. 85 mm with anti-parallax mirror scale, dial size 80 x 100 mm with color coded terminals. Overall size 100 x 100 x 140 mm approx. Accuracy : ±2% FSD. -35-0-35mV
Each wound on a rectangular insulated bobbin, connections by 4mm sockets spaced at 19mm.
Each wound on a rectangular insulated bobbin, connections by 4mm sockets spaced at 19mm.
Glass jar 15 x 10cm length x dia. Complete with zinc and copper plates. 90 x 25 x 1.5mm
The Bench Top Micro voltmeter is an effective and robust replacement for a spot galvanometer, with 9 ranges from 100μV to 1V. The input resistance of 1kΩ gives 10MΩ/V on 100μV range, which is consider
To demonstrate electromagnetic induction and transformer principles. Primary coil with 175 turns, secondary coil with three different windings 500; 1,000 and 1,500 turns. Coils are wound on molded pip
To hold up to four D cells beneath it enables use of one, two, three or four cells
The moving coil multi-range ammeter can be used to measure A.C. as well as D.C. currents. The operation of these meters depend on the interaction between the field of permanent magnet and moving coil
Terminals on these lamp boards let you connect lamps in series or parallel. Lamp board features removable shunt wires that allow for quick changing from parallel to series or any combinations of the t
Ultra Max Long life rechargeable batteries. Recharge up to 1000 times, compatible with any brand of charger. Come ready charged Size AAA Pk4
For AA AAA C D and 9v (PP3) NiMH/NiCD rechargeable batteries Charging indicator lights (does not indicate when fully charged) Polarity reverse protection Plugs into any standard UK wall socket Charges
Spade shaped standard terminal with 4 mm socket connector to convert screw terminal for use with 4 mm plug connection. 1 red and 1 black
13A extension lead. Neon power indicator. Individual switches for each plug.
Electrical insulation tape in a range of fade-resistant colours. Rubber glue on PVC carrier with good elasticity and elongation properties allowing conformity to irregular surfaces. Provides moisture-
Electrical insulation tape in a range of fade-resistant colours. Rubber glue on PVC carrier with good elasticity and elongation properties allowing conformity to irregular surfaces. Provides moisture-
Showing products per page